User manual AEG-ELECTROLUX 760D-D/CH

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. and please pass it to any future owner of the appliance. [. . . ] Built-in appliances may only be used after they have built in to suitable builtin units and work surfaces that meet standards. Triple cooking zone To switch on middle ring To switch on outside ring To switch off outside ring To switch off middle ring Roasting zone To switch on outside ring To switch off outside ring Touch Touch Touch Touch Touch Touch Sensor panel for 1-2 seconds. Sensor panel for 1-2 seconds for 1-2 seconds Power indicator One power indicator is lit. Power indicator is lit goes out The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set. Control panel To switch on Touch To switch off Touch Display heat setting that was previously set (not automatic warm up function) . Timer functions are not stopped by STOP+GO. STOP+GO locks the whole control panel except the sensor field All cooking zones are equpped with an automatic warm up function When setting a heat setting using , when starting from , the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set. Switch on (only when starting at ) Switch off Not used If there is still residual heat on the cooking zone (display warm up is not performed. The length of time that the automatic warm up function operates depends on the heat setting selected. Using the child safety device The child safety device prevents unintentional use of the appliance. Touch for 4 seconds The child safety device is switched on. Heat setting v, 1 - 2 3-4 5 6-9 Switches off after 6 hours 5 hours 4 hours 1. According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much. You can recognise good cookware from the bottoms of the pans. Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolorations on the glass ceramic surface which are difficult or impossible to remove. Always place cookware on the cooking zone before it is switched on. Switch cooking zones off before the end of the cooking time, to take advantage of residual heat. Bottom of pans and cooking zones should be the same size. The information given in the following table is for guidance only. Heat setting 0 V Cookingprocess suitable for Residual heat, Off position Keeping Keeping cooked foods warm food warm Melting Hollandaise sauce, melting butter, chocolate, gelatine Simmering rice and milk-based dishes Heating up ready-cooked meals Steaming vegetables, fish braising meat Steaming potatoes 4-5 Boiling Cooking larger quantities of food, stews and soups 6-7 Gentle Frying Heavy Frying Boiling Searing Deep frying 60-150 mins. Cover Stir occasionally Cook with lid on Add at least twice as much liquid as rice, stir milk dishes part way through cooking With vegetables add only a little liquid (a few tablespoons) Use only a little liquid, e. [. . . ] The cooking zone was only on If the cooking zone is supfor a short time and is posed to be hot, call the Custherefore not hot tomer Service Department. Let the cooking zone cool down The highest heat setting has the same power as the automatic warm up function The automatic warm up func- There is still residual heat on tion is not switching itself on the cooking zone The highest heat setting is set The heat setting was set using 1. Switching off the cooking the sensor field zone 1. Set the cooking zone using the sensor field Acoustic signal sounds and appliance switches itself on and then off again; after 5 seconds another acoustic signal sounds is lit The On/Off sensor field has been covered up, e. [. . . ]