User manual AEG-ELECTROLUX 78001KF-N 36O

[. . . ] 78001KF N User manual Ceramic hob Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] Set the same heat setting for the two cooking zones (max. With different cookware there can be differences in the heat distribution. Good cooking results can be achieved with cookware with thick, flat bottoms. 17 3 Automatic switch off Cooking surface If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. If one or more sensor fields are covered by objects (a pan, cloths, etc. ) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. Control panel When the appliance is switched off, if one or more of the sensor fields on the control panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered. Induction cooking zones In the event of overheating (e. g. when a pan boils dry) the cooking zone automatically switches itself off. Before being used again, the cooking zone must be set to 0 and allowed to cool down. If cookware that is not suitable is used, f flashes in the display and after 2 minutes the display for the cooking zone switches itself off. If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. Before being used again, the cooking zone must be set to 0. Heat setting v, 1 - 2 3-4 5 6-9 Switches off after 6 hours 5 hours 4 hours 1. 5 hours 18 Tips on cooking and frying 3 Information about acrylamides According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health risk due to acrylamide. Therefore we recommend cooking at low temperatures and not browning foods too much. Cookware material Cookware material Steel, enamelled steel Cast iron Stainless steel Aluminium, copper, brass Glass, ceramic, porcelain Suitable yes yes if appropriately labelled by the manufacturer ----- Cookware for induction cooking zones 3 Cookware for induction cooking zones is labelled as suitable by the manufacturer. Suitability test Cookware is suitable for induction cooking, if . . . a little water on an induction cooking zone set to heat setting 9 is heated within a short time. a magnet sticks to the bottom of the cookware. [. . . ] This guarantee is in addition to your statutory and other legal rights. Exclusions Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. Products of Electrolux manufacturer that are not marketed by Electrolux 32 European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. [. . . ]