User manual AEG-ELECTROLUX 9950BW3

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. [. . . ] Do not use detergent and do not load the baskets. if you use the combi detergent tablets , activate the multitab function. These tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area. The dishwasher salt keeps the water softener clean and in good conditions. refer to the table to adjust the water softener to the right level. It makes sure that the water softener uses the correct quantity of dishwasher salt and water. Press and hold function buttons (B) and (C) at the same time until the indicators above function buttons (A), (B) and (C) flash. The indicator above function button (A) continues to flash. Press function button (A) again and again to change the setting. Other products can cause damage to the appliance. refer to the instructions on the detergent packaging. Detergent tablets do not fully dissolve with short programmes and detergent residues can stay on the dishes. We recommend that you use detergent tablets with long programmes. If the programme has a prewash phase, put a small quantity of detergent in the compartment (D). If you use detergent tablets, put the tablet in the compartment (A). Make sure that the release button locks into position. The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: · all the programme indicators come on. If the control panel shows other conditions, press and hold function buttons (B) and (C) at the same time until the appliance is in setting mode. Starting a programme without delay start The wash indicator comes on. The display shows the programme duration that decreases with steps of 1 minute. [. . . ] The programme was not applicable for the type of load and soil. Make sure that the filters are correctly assembled and installed. remove remaining soil with a thin pointed object. Make sure that the programme is applicable for the type of load and soil. [. . . ]