User manual AEG-ELECTROLUX A75100GA1

[. . . ] ARCTIS 75100 GA1 Freezer Operating Instructions Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] The warning light and warning tone switch off automatically when the ACTUAL temperature in the freezer compartment drops again and returns to the range of the display. Additionally operate FROSTMATIC by depressing the FROSTMATIC button for more than one second. The amber pilot light (5) comes on and the refrigerator motor runs continuously. After the storage temperature has been reached, press the FROSTMATIC button again to switch off the FROSTMATIC function. Note: when the appliance is switched on for the first time, the warning light and the warning tone signal an alarm because the necessary storage temperature in the freezer compartment has not yet been reached. 14 Starting up and temperature regulation 1. Insert the plug into the plug socket. 2. The green mains pilot indicator illuminates. A warning tone sounds and the flashing red warning light indicates that the required storage temperature has not yet been reached. Press the WARNING OFF button to switch off the warning tone. Press either the , , +" (WARMER) or , , -" (COLDER) button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display. Set the required temperature by pressing the , , +" (WARMER) or , , -" (COLDER) buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. With each further press of one of the two buttons, the DESIRED temperature is adjusted by one display field. From a food safety point of view -18°C should be considered sufficiently cold for storing food in the freezer. Once the required temperature has been set, after a short period (approx. 5 sec. ) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. The display will change from flashing to continuous illumination. The compressor will start and then run automatically. When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. Wait until the freezer compartment has reached a temperature of -18°C before storing frozen food. 15 FROSTMATIC FROSTMATIC button The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming. The FROSTMATIC function is switched on by pressing the FROSTMATIC button. [. . . ] Move the appliance slightly. Heavy build up of frost, possibly also on the door seal. Door seal is not air tight (possibly after reversing the door). Appliance is not level. The appliance is touching the wall or other objects. The compressor does not start immediately after changing the temperature setting. This is normal, no error has The compressor starts after occurred. a period of time. Important: regularly check on the red temperature pilot light and temperature display to establish that the storage temperature is being maintained. 22 Noises during Operation The following noises are characteristic of refrigeration appliances: · Clicks Whenever the compressor switches on or off, a click can be heard. · Humming As soon as the compressor is in operation, you can hear it humming. [. . . ]