User manual AEG-ELECTROLUX A82300HNW0

[. . . ] 3 7 8 9 Making Coffee with Beans Filling the Coffee Bean Container Select Cup Size Selecting the Coffee Quantity Dispensing Coffee Making Ready-ground Coffee Using the Ground Coffee Filler Select Cup Size Dispensing Coffee Frothing Milk Preparing Hot Water Changing and Saving the Cup Measure 29 822_949_318 CP2. 2) P Cup rack Q Opening for ground coffee with lid (ground coffee filler) R Bean-container position setting S Service cover release button T Release catch for removing grinding ring U Lever for setting grinding texture Top view (see Fig. 2) Bean container with lid Service cover Selection dial for steam and hot water Height-adjustable dispenser with outlets Swivel nozzle for steam and hotwater with removable frothing aid Coffee grounds container (removable) 1. 3 a Drip grille Drip tray float b Drip tray Type plate (at top behind service cover) c Control panel (see Fig. [. . . ] 3, f) to save and exit the "Set Coffee Temperature" mode. The switch-off time has been factoryset to 3 hours. You can change this setting as follows: Switch the appliance on and wait until it is in the base position. Simultaneously press and hold the Key for 2 cups of coffee (Fig. 3, a) and the "On/Off" key (Fig. Keep both keys pressed for around 1 second, until the "On/Off" key (Fig. 3, h) indicator and one of the switch-off time indicators are illuminated. Use the "Coffee Quantity" key (Fig. 3, c) (increase time) or the "Cup Size" key (Fig. 3, d) (reduce time) to select the switch-off time you require. When you have selected the switch-off time, press the"Clean" key (Fig. Rinse out the water tank with fresh water. Empty the coffee grounds container daily, see „Emptying the Coffee 3 Grounds Container" page 40. This can be done at any time, but must be done when the red Drip tray float (Fig. 1, I) appears through the opening in the 15. Regularly (at least once per week) clean the Water tank (Fig. 1, G) with warm water, a mild washing up 0 liquid and possibly a brush. From time to time, remove the coffee bean container and clear away any res0 idues. Each time the machine is used for frothing, remove the frothing aid and clean off any milk remains. The air 0 intake opening under the seal must not become blocked. This can be cleaned out with a thin needle. At regular intervals, after every 16 coffee brews "1 cup“ resp. [. . . ] Allow the appliance to cool before packing. €“ Care should also be taken with the location of the coffee machine – especially in cold weather, when damage can be caused by freezing. €¢ • • • 17 Using the Total Cups Counter The coffee machine has the facility to display the total number of cups of coffee made. November 2007 6:30 18 g If the Key for 2 cups of coffee (Fig. [. . . ]