User manual AEG-ELECTROLUX A82968-GA1

[. . . ] Environmental protection Disposal Packaging material The packaging materials are environmentally friendly and can be recycled. Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ] Repairs and maintenance, especially of parts carrying electrical current, must only be done by technicians authorised by the manufacturer. The manufacturer and retailers do not accept responsibility for any damaged caused to people, animals or property as a result of repairs and maintenance carried out by non-authorised personnel. Repairs undertaken during the guarantee period must only be done by technicians authorised by the manufacturer. If this is not the case then any damage resulting from the repair in question is excluded from the guarantee. The appliance must be disconnected from the electrical current when installation and repair work is being done. To disconnect the appliance from the current, one of the following conditions must apply: The switchboard fuses / circuit breakers must be disconnected. The plug should be removed from the socket. To remove the plug from the socket do not pull on the electric cable but rather pull out the plug itself directly. Precautions during use This appliance complies with current safety standards. Improper use of the appliance may put the user at risk. Read the operating instructions carefully before using the appliance for the first time. Both the odour and any smoke that may form will disappear after a short time and neither signifies that there is anything wrong with the connection or the appliance. control Panel Using the crockery warmer To use the crockery warmer , proceed as follows: Put the crockery in the drawer. Select the function you want by turning the thermostat control to the desired position. Switch on the appliance by pressing the switch, which will light up. Be careful not to use too much force when closing the drawer since it may open up again. Before taking out the warm crockery you must switch off the crockery warmer by pressing the switch again. Selecting function By turning the thermostat control you can select temperatures between 30 and 85 °C. Do not force the thermostat control to the left of the "0" position or to the right of the maximum position since this may damage the appliance. As soon as the temperature selected is reached, the heating is turned off. When the temperature drops to a value below that selected, the heating is turned back on. The temperature scale is not marked with absolute temperatures in ºC but instead has symbols which correspond to the optimum temperatures for groups of crockery: ºC 30ºC 40­50ºC Cups / glasses warming Preheat dishes 60-70ºC Keep food warm 80ºC Low temperature cooking Function Defrosting Proving dough The control panel is only visible when the drawer is open. [. . . ] We recommend not to use the warming function for more than 1hr. Load capacity Load capacity depends on the size of the crockery items: WS 210 8 persons servings WS 290 12 persons servings Cleaning must be done with the crockery warmer disconnected from the electrical power supply. Remove the plug from the power socket or disconnect the crockery warmer power supply circuit. Do not use aggressive or abrasive cleaning products, abrasive sponges or pointed objects since stains or abrasion marks may appear. [. . . ]