User manual AEG-ELECTROLUX AAC6720

[. . . ] 0 This symbol guides you step by step in the operation of the appliance. 3 2 Supplementary information regarding operation and practical applications of the appliance appear after this symbol. Tips and notes concerning economical and environmentally sound use of the appliance are marked with the cloverleaf. Explanations of the technical terminology used in the operating instructions can be found at the end in the section "Technical Terminology". The operating instructions contain instructions for the correction of possible malfunctions by the user in the section "Something not working". [. . . ] Position "·" means: Off Position "1" means: Highest interior temperature (warmest setting) Position "4" means: Lowest interior temperature (coldest setting) Recommended settings: For normal use: position "1, 5" to "2"; 0 1. Turn the temperature regulator to the desired setting with the aid of a coin. The green mains power light illuminates. The compressor starts and then runs automatically. The red warning light illuminates indicating that the required storage temperature has not yet been reached. 3 The warning light switch off automatically when the temperature in the freezer drops again and returns to the setting of the temperature regulator. The yellow fast freeze light illuminates. The red warning light remains illuminated until the required temperature has been reached. After the red warning light has gone off, press the fast freeze button again to switch off the fast freeze function. Wait until the freezer has reached a temperature of ­18 °C, or the red warning light has gone out, before storing frozen food. From a food safety point of view, -18 °C should be considered cold enough as a storage temperature. The red warning light signal an alarm ­ if the appliance is switched on (the storage temperature has not yet been reached); ­ if the temperature in the freezer is too warm; A temperature increase is probably due to: ­ frequent or extended opening of the door; ­ storing large quantities of warm food; ­ high ambient temperature; 818 2113-00/4 3 16 Switching the Appliance Off 0 1. Once the required storage temperature has been reached, press the fast freeze button again. Tips: · The following are suited for the packaging of frozen goods: ­ freezer bags and polyethylene wraps; ­ plastic containers for frozen goods; ­ extra­thick aluminium foil. · The following are suitable for sealing bags and wrap: plastic clips, rubber bands or tape. · Smooth the air out of the bag before sealing; air makes it easier for the frozen food to dry out. 18 818 2113-00/4 · Make flat packages, because these freeze more quickly. · Do not fill plastic containers for frozen goods to the brim with liquid or paste­like goods, because liquids expand during freezing. Note for inspection authorities: Batch plans for the determination of freezing performance or warm-up time can be requested directly from the manufacturer. Frozen Storage Important!Wait until the necessary storage temperature of ­18 °C has been reached before storing food already frozen. · Load freezer only with packaged frozen goods, so that they do not dry out or lose their flavour, and so that no flavour contamination of other frozen goods can occur. · Please observe maximum storage times and expiry dates of frozen goods. 2 Place frozen foods in the drawers sorted by type, as far as possible. This will give you a better overview of the contents, avoid extended door opening and therefore save electricity. Preparation of Ice Cubes 0 1. Fill the ice cube tray 3/4 full with cold water, place it in the freezer and leave to freeze. [. . . ] In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for in-guarantee service calls. Noises during Operation The following noises are characteristic of refrigeration appliances: · Clicks Whenever the compressor switches on or off, a click can be heard. · Humming As soon as the compressor is in operation, you can hear it humming. · Bubbling/Splashing When refrigerant flows into thin tubes, you can hear bubbling or splashing noises. [. . . ]