User manual AEG-ELECTROLUX AE4582

[. . . ] Clean filters, brush roll, hose and put on charge. When fully charged the LED's* will turn off and go into standby mode = much lower power consumption, indicated with one blink per minute. You should regularly check that the nozzle wheels and the brush roll are clean in order to avoid scratching sensitive floors. Start Ergorapido by pushing the on/off button downwards: ­ First setting = Full power ­ Second setting = Intermediate power 2. [. . . ] Attach the crevice nozzle to facilitate cleaning of areas difficult to reach, or attach the brush for dusting. Remove the hand unit by pressing the release buttons. The crevice nozzle and small brush are stored in the charging station. Ergorapido's dust container must be emptied regularly and the dust container and the filters need to be cleaned to maintain a high suction power. Clean the dust container by placing the hose of another vacuum cleaner at the opening. Remove the filters, empty the contents into a dustbin. Return filters and click dust container back into place. Release the dust container, pull/ release spring 5-6 times to dislodge dust. Release dust container, take out both filters by pressing release buttons. Dust container and filters can be shaken clean or rinsed in warm water (never in dishwasher). This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Please remove the plug from the socket outlet before cleaning or maintaining the appliance. Children should be supervised to ensure that they do not play with the appliance. Plastic bags should not be accessible to children to avoid suffocation. Use only the original charging adaptor designed for this model. When housing shows visible signs of damage. On fine dust, for instance from plaster, concrete, flour, hot or cold ashes. The battery must not be dismantled, shortcircuited, placed against a metal surface or exposed to strong heat. ⷠNever use the vacuum cleaner without its filters. Using the vacuum cleaner in the above circumstances may cause serious damage to the product. [. . . ] Using the vacuum cleaner in the above circumstances may cause serious damage to the product. Servicing or repairs In cases of breakdown or faults, your Ergorapido must be taken to an authorized Electrolux service centre. If the supply cord or charger is damaged, it must be replaced by Electrolux or its service agent or an equally qualified person in order to avoid a hazard. Consumer information Electrolux declines all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. [. . . ]