User manual AEG-ELECTROLUX AE4588S

[. . . ] And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Safety information Children and vulnerable people safety General safety Daily Use Care and cleaning Installation Service Control panel Switching on Switching off Temperature indicator Temperature regulation "Freezing" or "Cooling" Function "Standard" Cooling Cooling drinks FROSTMATIC function High temperature alarm First use Cleaning the interior Daily use Freezing fresh food Storage of frozen food 2 3 3 4 4 4 4 5 5 5 5 6 6 7 7 7 7 7 7 8 8 8 Freezing Calendar Thawing Cold accumulators Helpful Hints and Tips Hints for freezing Hints for storage of frozen food Care and cleaning Periodic cleaning Defrosting of the freezer Periods of non-operation What to do if. . . Closing the door Cleaning the evaporator Technical data Installation Location Positioning Electrical connection Rear spacers Door reversibility Environmental concerns 8 8 8 8 8 9 9 9 10 10 10 11 11 12 12 13 13 13 14 14 15 Subject to change without notice Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] 5 sec. ) the temperature indicator will show again the current ACTUAL temperature inside the corresponding compartment. The temperature indicator will change from flashing to continuous illumination. For a correct storage of the food the following temperature should be set: · -18 °C in the freezer. The following DESIRED temperature settings are possible: Operating mode "Freezing": from -15 °C up to -24 °C in 1 °C steps Operation mode "Cooling": from 0 °C up to 16 °C in 1 °C steps; When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. As the storage temperature within the appliance is reached quickly you can store food immediately after switching on. "Freezing" or "Cooling" Function If necessary, switch over the appliance between the operating modes "Freezing" and "Cooling". To activate the function, do these steps: 1. Press the FROSTMATIC switch and the temperature regulator (warmest) simultaneously for 5 seconds. When the setting is switched from "Freezing" to "Cooling" FC (Freezing - Cooling) appears in the temperature indicator, an acoustic signal confirms the change and the temperature indicator changes to flashing figures (DESIRED temperature cooling mode +5 °C). Using the temperature regulators, the required temperature for the cooling mode can now be entered. When the setting is switched from "Cooling" to "Freezing" CF (Cooling - Freezing) appears in the temperature indicator, an acoustic signal confirms the change and the temperature indicator changes to flashing figures (DESIRED temperature freezing mode -18 °C). Using the temperature regulators, the required temperature for the freezing mode can now be entered. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. 10 What to do if. . . Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner. This operation will improve the performance of the appliance and save electricity consumption. Take care of not to damage the cooling system. Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply. Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: · disconnect the appliance from electricity supply · remove all food · defrost 4)and clean the appliance and all accessories · leave the door/doors ajar to prevent unpleasant smells. If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure. What to do if. . . WARNING!Before troubleshooting, disconnect the mains plug from the mains socket. [. . . ] The appliance shall have the plug accessible after installation. Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: Climate class SN N ST T +10°C to + 32°C +16°C to + 32°C +16°C to + 38°C +16°C to + 43°C Ambient temperature Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician. [. . . ]