User manual AEG-ELECTROLUX AG2231AA

[. . . ] Never use the hood for purposes other than for which it has been designed. Never leave high naked flames under the hood when it is in operation. Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides. Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames. [. . . ] - Activated charcoal filter W These filters are not washable and cannot be regenerated, and must be replaced approximately every 4 months of operation, or more frequently with heavy usage. Clean the on the product or on its packaging indicates that this product may not be treated as household hood using a damp cloth and a neutral liquid detergent. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. EN - RECOMMENDATIONS AND SUGGESTIONS - The Instructions for Use apply to several versions of this appliance. Ty Product Components 11 Hood Canopy complete with: Controls, Lights, Filters 21 Telescopic chimney made up of: 2. 1 1 Telescopic frame complete with Suction fan, made up of: 7. Placethedrillingtemplate21 provided on the ceiling/support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob. Forwoodenshelf, use4screws12g with washers 22 and nuts 23, provided. When the required speed is touched, it will become brighter (intensity 100%) than the other functions (intensity 50%). Touching this button activates automatic shutdown of the Motor, the Fans and the Lighting with a 10 minute delay. It can only be activated with the motor on, running at any speed except Intensive, and with the Sensor = Off. When this button is pressed and held for 4 seconds (Motor Off + Lights Off, in the absence of other alarms, the Led will light up for: 4 seconds to indicate that the Remote Control has been Activated 2 seconds to indicate that the Remote Control has been Deactivated In this mode the Hood operates automatically for a maximum of 5 hours, after which it switches the Motor off. The hood modifies the speed of the motor according to the findings of the sensor. When this area is touched, the Lights turn on at the required intensity. When the lighting intensity is touched, it will become brighter (intensity 100%) than the other functions (intensity 50%). After 100 hours operation the Led lights up continuously to indicate saturation of the Metal Grease Filters. After 200 hours operation the Led flashes to indicate saturation of the Activated Charcoal Filters. When this button is pressed and held for 4 seconds(Motor Off + Lights Off), in the absence of other alarms, the Led will light up for: 4 seconds to indicate the Activated Charcoal Filter Alarm has been activated 2 seconds to indicate the Activated Charcoal Filter Alarm has been deactivated Manages Lighting Intensity: 0-L1-L2-L3-LMax Filter ResetResets the Filter Saturation alarm when the button is touched with the motor and lighting turned off. After connecting the hood to the mains, the commands are activated after 4seconds. [. . . ] The controls are activated by touching the selected function, which will light up more brightly (intensity 100%) with respect to the other hood functions (intensity 50%). When no commands are given for at least 10 seconds, only the selected functions will be lighted (Intensity 100%) and all the rest will turn off (Intensity 50%). After 7 hours in operation, if no further commands are given the hood will switch off (Motor Off + Lights Off), from here you can touch for activated the function, and the next touch you can select the desired function. It is possible to activate one of the hood functions (Speed and Lighting) not just by touching the control panel, but also by placing a finger on the panel and sliding it towards the chosen function without lifting it off. [. . . ]