User manual AEG-ELECTROLUX AG86050E

[. . . ] The appliance is not intended for use by young children and infirm persons without supervision. Use only the original charging adaptor designed for this model. When housing shows visible signs of damage. On fine dust, for instance from plaster, concrete, flour, hot or cold ashes. [. . . ] Using the vacuum cleaner in the above circumstances may cause serious damage to the product. such damage is not covered by the warranty. Never use the vacuum cleaner without its filters. Fit the handle by carefully inserting it into the lower main body. Position the charging station close to a mains socket (well away from heat sources or wet places). insert the adaptor into the mains socket and connect it to the charging station. Underneath the charging station there is a hollow space where redundant cable can be wound (21a). The wall unit can also be mounted on a wall (22a). Release the wall unit from the floor unit (22b). Always ensure that the wall can bear the weight of Ergorapido. Always make sure that Ergorapido is turned off when placed in the charging station. Make sure that the parts are dry before they are reassembled. If the brush roll becomes blocked or jammed for any reason, the indicator light (33a) on the floor nozzle will go out. Push the brush roll release button (33b). The hatch cover (33c) will come slightly free and the brush roll can now be removed. Carefully use a pair of scissors or a sharp knife to remove any items such as threads that may have become entangled. Replace the brush roll and make sure that it fits into its guiding tracks, and that it can spin freely. Occasionally objects can get stuck in the bellows, and this can affect suction power. Remove the bellows by loosening the catch and then pulling the bellows from the attachment. Clean the bellows using a stick or similar object. Put the bellows back in the attachment and lock using the catch. Remove the wheels by carefully prizing them loose using a screwdriver inserted into the cavity. [. . . ] Remove threads or any other objects that may have become jammed in the wheel shafts. Reassemble the wheels by pressing them back into their tracks. If your Ergorapido is to be disposed of, the batteries should be removed. Used batteries should never be disposed of with household waste. [. . . ]