User manual AEG-ELECTROLUX AGS 1900

[. . . ] Adapting the base station to one's own requirements ( page 31). Adapting the mobile unit to one's own requirements ( page 36). Using the answering machine Basic answering machine settings ( page 15). Recording announcements and advisory message ( page 45). Listening to recorded messages ( page 47). [. . . ] Level 6 = The default setting is Level 6 (loud). The volume of the tone ringing at the mobile unit can also be set ( page 36). The tone ringing which has been set is heard; the volume which has been set is indicated: : n5 6 Pf N b (Example: volume level 1 has been set) oB Press the digit for the level required (1 to 6) or 0 for "Tone ringing off" and store. Setting pitch of base station tone ringing You can set the pitch of the tone signals at the base station. The pitch can be set to one of 6 levels. In order to adjust the pitch, the tone ringing should be switched on at the base station. It is advisable to have distinctive ringing signals for the base station and the mobile units. The pitch of the tone ringing at the mobile unit can also be set ( page 36). 31 4. 8. 99 KAP09. FM4 Gigaset 2015, GBR: A30852-X-1105-B301-1-7619 Individual settings B# *6 Start the procedure. The tone ringing which has been set is heard; the pitch which has been set is indicated: : n 61 Pf oB N b (Example: pitch level 1 has been set) Press the digit for the level required (1 to 6) and store. Activating/deactivating key click at base station You can deactivate the key click at the base station. The key click is activated in the default setting. or To deactivate the key click. O 421B O 420B o Emergency numbers if Gigaset 2015 is barred The emergency numbers 999 and 112 are always accessible. You can store up to four additional emergency numbers. If a barred code is already stored, the old number is overwritten with the new number. Any barred codes entered are marked for storage. Terminate the process: store all inputs. or o O B or You cannot use this facility until the barring function has been activated. 34 4. 8. 99 KAP09. FM4 Gigaset 2015, GBR: A30852-X-1105-B301-1-7619 Individual settings Cancelling all barred codes You can cancel all the barred codes for a mobile unit. Enter the 4-digit system code ( page 14). The registered mobile units or their internal call numbers are shown on the display: : o 1 45 PfN o b (Example: mobile units 1, 4 and 5 are logged on) Enter the internal number of the required mobile unit (1 to 6). Cancel all barred codes for the selected mobile unit. B Activating/deactivating barred number function You can activate and deactivate the barred number function for a registered mobile unit. Other mobile units are not affected by the barring function. Calls can still be taken at the mobile unit when the barring function is in effect. No calls are barred in the default setting. Enter the 4-digit system code ( page 14). The registered mobile units or their internal call numbers are shown on the display: : o 123 Pf o N b (Example: mobile units 1, 2 and 3 are logged on) 1B 0B or Enter the internal number of the required mobile unit (1 to 6). [. . . ] 38 Power connecting cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Power supply unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Private automatic branch exchange . . . . . . . . . . . . . . 12 Protect state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]