User manual AEG-ELECTROLUX ARC0642-5E

[. . . ] Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. [. . . ] The side at which the door opens can be changed from the right side (factory adjustment) to the left side, if the installation site requires. When changing the side at which the door opens, the appliance may not be connected to the mains. Procced as follows: To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the door of the appliance during the operations. Pay attention that the border of the doors are parallel to the top border, otherwise adjust the position of the lower hinge of the door (A). Remove from the ventilation grille the cover (e) and refit it on the opposite side. Unscrew the bottom handle bracket from the door (2). Unscrew the top handle bracket from the door (3) and screw onto the bottom righthand side of the door (4). Turn the handle bracket with the handle rod 180° and screw them to the door (5) and the fitted handle bracket (6). Reposition, level the appliance, wait for at least one hour and then connect it to the mains socket. In any case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the reversibility of the doors at your cost. each time the button is pressed the temperature is adjusted by 1 °C. From a food safety point of view -18 °C should be considered sufficiently cold for storing food in the freezer. The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming. If the FROSTMATIC function is not ended manually, the appliance electronics switch off the FROSTMATIC function after 52 hours. The FROSTMATIC function can be ended manually at any time by pressing the FROSTMATIC button again. Power cut) warning light (G) will start to flash and a buzzer will sound. After the temperature has returned to normal, the warning light (G) will continue to flash, although the buzzer has stopped. To switch off, hold down the ON/OFF button for approx. This will result in a countdown from "3" to "1" taking place in the temperature display. Note: The appliance cannot be switched on or off if unplugged, or if there is no power being supplied to it. Following connection to the mains power supply, the appliance returns to the same operating state as before the interruption of main power. [. . . ] accumulation of dust at the condenser increases energy consumption. For this reason carefully clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner. Do not pull, move or damage any pipes and/or cables inside the cabinet. If the appliance is not going to be used for an extended period: Remove all deep-frozen packages as well as ice trays. [. . . ]