User manual AEG-ELECTROLUX ARC0942-6I

[. . . ] These operating instructions are for use with several technically comparable models with varying accessories. Please observe the notes which apply to your model. Notes which are important for your safety or for the proper functioning of the appliance are stressed with a warning triangle and/ or with signal words (Warning!, Caution!, Attention!). This symbol and numbered instructions guide you step by step in the operation of the appliance. [. . . ] Information: When in FROSTMATIC mode the appliance is operating at maximum refrigerating capacity. The noises produced by the refrigerating unit may be temporarily louder. WARNING OFF button With the WARNING OFF button, the acoustic warning signal can be switched off, e. g. the "Open Door" warning when sorting in or out, the commodities to be cooled or frozen. When there is a partial/total thaw warning, if the WARNING OFF button is activated the temperature display will show the warmest temperature the frozen food has reached on restoration of the power supply. Prior to initial start-up 0 1. Please clean the interior and all outfits prior to the initial operation (see the "Cleaning and Maintenance" chapter). The appliance must be correctly installed in accordance with the chapter "Installing and Connecting" before it is put into operation for the first time. Care should be especially taken that the mains voltage and frequency available correspond with the appliance's rating plate. The green stand-by (mains confirmation) display lights up. The temperature display shows the current temperature in the appliance (ACTUAL temperature). The red warning indicator will flash to indicate that the necessary storage temperature has not yet been reached. After the appliance has been switched on, the warning tone is suppressed until such time as the DESIRED temperature is reached. Thereby a DESIRED temperature of +2 °C is automatically preset. After 6 hours have lapsed, the COOLMATIC function is independently ended. The appliance returns to the originally set DESIRED temperature and the temperature display again displays the current appliance interior temperature. You can manually terminate the COOLMATIC function at any time, in that you press the FROSTMATIC button again. Once the COOLMATIC function has been switched on the DESIRED temperature that was set originally cannot be changed. When the COOLMATIC function is switched on "IC" for Intensive Cooling appears in the temperature display. If the set DESIRED temperature is lower than 3 °C the COOLMATIC function will have no effect. Switch on FROSTMATIC (Only possible in the operating mode "Freezing") The FROSTMATIC function caters for fast freezing of fresh foodstuffs and simultaneously protects the already stored foodstuffs against undesired temperature rise in the freezing room. The yellow control display near FROSTMATIC button illuminates. 3 The electronics of the appliance independently recognises when the quick freezing process can be terminated, and then switches off the FROSTMATIC function automatically (depending on the quantity to be frozen after a minimum of 30 hours to maximum 51 hours). You can stop the fast freezing process manually at any time by pressing the FROSTMATIC button again. 24 Important!Once the FROSTMATIC function has been switched on the DESIRED temperature that was set originally cannot be changed. The current freezer temperature appears in the display when the FAST FREEZE function is switched on. [. . . ] · Humming As soon as the compressor is in operation, you can hear it humming. · Bubbling/Splashing When refrigerant flows into thin tubes, you can hear bubbling or splashing noises. Even after the compressor has been switched off, this noise can be heard for a short time. · Noise The ventilator generates air flow whereby noise can be emitted. 37 Regulations, Standards, Guidelines This appliance was designed for household use and was manufactured in accordance with the appropriate standards. [. . . ]