User manual AEG-ELECTROLUX ARC2702GS

[. . . ] Always ensure that the wall can bear the weight of UniRapido. Leave UniRapido on charge when not in use. Always make sure that UniRapido is turned off when placed in the charging station. UniRapido's dust container must be emptied regularly, plus dust container and filters need to be cleaned to maintain a high suction power. [. . . ] Clean the filters every third emptying or when UniRapido has low suction power. Make sure parts are dry before reassembling. Release the whole dust container by pushing the release button. Empty the content into a wastepaper basket. Shake them clean or rinse separately using warm water. Make sure filters are dry before reassembling in reverse order. Put the filters back and press back the dust container in reverse order. If the brush roll becomes blocked or jammed, a protection circuit will block the power supply to the motor. The hatch cover will come slightly free and the brush roll can now be removed. Children should be supervised to ensure that they do not play with the appliance. Use only the original charging adaptor designed for this model. When housing shows visible signs of damage. On fine dust, for instance from plaster, concrete, flour, hot or cold ashes. The battery must not be dismantled, shortcircuited, placed against a metal surface or exposed to strong heat. Using the vacuum cleaner in the above circumstances may cause serious damage to the product. such damage is not covered by the warranty. Servicing or repairs In cases of breakdown or faults, your UniRapido must be taken to an authorized Electrolux service centre. If the supply cord is damaged, it must be replaced by Electrolux or its service agent or a similarly qualified person in order to avoid a hazard. [. . . ] Servicing or repairs In cases of breakdown or faults, your UniRapido must be taken to an authorized Electrolux service centre. If the supply cord is damaged, it must be replaced by Electrolux or its service agent or a similarly qualified person in order to avoid a hazard. Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. [. . . ]