User manual AEG-ELECTROLUX ARCTISS.2773-4GS

[. . . ] · Prior to performing maintenance or cleaning, ensure that the appliance is switched off and unplugged from the mains. · Never remove the mains plug from the socket by pulling on the cable. · Do not use the appliance if: ­ the mains lead is damaged, ­ the housing shows visible signs of damage. · Avoid running over the mains cable with the appliance. [. . . ] Improper repairs can give rise to significant hazards for the user. · In the case of a malfunction, please therefore contact your dealer or Electrolux customer service directly. · Ensure that a paper filter and a MICROFILTER are always fitted. · Leave wet shampooed carpets to dry completely. Never vacuum liquids with the vacuum cleaner ­ otherwise the vacuum cleaner will be damaged. Furthermore, protection against electric shock may be impaired. · People and animals must not be vacuumed with the appliance. · Keep children away from the appliance. · Do not vacuum up matches, hot ashes or cigarette ends with the appliance. Avoid drawing up hard, pointed objects because these could damage the appliance or the paper filter. The additional rotating joint makes your vacuum cleaner particularly agile. The rollers ensure that the separation between the floor and underside of the nozzle is always constant ­ this makes it possible to vacuum hard floors without problems. 3 Press the button to remove the floor nozzle (Figure 3). Changing the Filters 1. Paper Filter 0 Open the bag compartment and remove the lid (Figure 7). Bags full of normal household dust may be disposed of with household rubbish. If necessary, wipe out the filter compartment with a damp cloth. 0 Place the new paper filter on the filter carrier (Figure 9). 2 2. MICROFILTER 1 Please note: The MICROFILTER must also be replaced every fifth paper filter change (Figure 10) to maintain optimum suction performance. By renewing the MICROFILTER in good time you will ensure good suction performance and reduce the amount of time spent vacuuming. 0 Insert the lid into the appliance and close by pressing it into place (Figure 11). Converting into a Handheld Appliance / Using the Crevice Nozzle The vacuum cleaner is also easy to use as a handheld appliance. 0 Remove the floor nozzle (Figure 3) and fit the crevice nozzle (Figure 6). 5 g Winding Up the Cable (Figure 12) The vacuum cleaner is equipped with a cable winder. [. . . ] 0 Remove the floor nozzle (Figure 3) and fit the crevice nozzle (Figure 6). 5 g Winding Up the Cable (Figure 12) The vacuum cleaner is equipped with a cable winder. 0 Simply take hold of the plug and pull out the mains cable. 0 To rewind the cable, press the cable rewind button (Figure 2/E). 3 You can press the mains cable into the clip on the upper part of the handle (Figure 13). Storage 3 The appliance can be stored in a manner that saves a considerable amount of space. Leave the floor nozzle fitted to the vacuum cleaner so that it can stand up on its own (Figure 14). [. . . ]