User manual AEG-ELECTROLUX AS3385-4GT

[. . . ] Fine dust, for example from plaster, concrete, flour, hot or cold ashes. The above may cause serious damage to the motor ­ damage which is not covered by the warranty. Open the front cover on the machine and check that the dust bag s-bag® and the motor filter are in place. (See also Replacement of filter) 13 Open the back lid on the machine and check that the exhaust filter* is in place. [. . . ] 14 Insert the hose until the catches click to engage (press the catches to release the hose). Increase suction power by rotating the control further up to "Max" position. stop the vacuum cleaner by rotating in the opposite direction to "Off" position. 18b* Suction power can also be adjusted by using the suction control on the hose handle. Use the nozzles as follows: Carpets: Use the combination floor nozzle with the lever in position (20). Hard floors: Use the combination floor nozzle with the lever in position (21). Note: Do not use the turbo nozzle on skin rugs or carpet fringes. to avoid damaging the carpet , do not keep the nozzle stationary whilst the brush is rotating. Do not pass the nozzle across electric cables, and be sure to switch off the vacuum cleaner immediately after use. The dust bag, s-bag® must be replaced latest when the indicator window is completely red. Note: The warranty does not cover any damage to the hose caused by cleaning it. Be sure to frequently clean the combination floor nozzle. 42* Press each wheel-hub and draw away the wheels. Remove dust-balls, hair or other objects that may be entangled. 43* Larger objects can be accessed by removing the connection tube from the nozzle. disconnect the nozzle from the vacuum cleaner tube and remove entangled threads , etc. Use the hose handle to clean the nozzle. 45a Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads , etc. Use the hose handle to clean the nozzle. 45b In case the turbo nozzle stops working, open the cleaning lid and remove any objects that obstructs the turbine to rotate freely. [. . . ] 45b In case the turbo nozzle stops working, open the cleaning lid and remove any objects that obstructs the turbine to rotate freely. Electrolux does not accept liability for defects arising from neglect, misuse or accident. This product is designed with the environment in mind and all plastic parts are marked for recycling purposes. For further information please visit our website: www. [. . . ]