User manual AEG-ELECTROLUX ASC 69FD2

[. . . ] It contains safety precautions, hints, information and ideas. If the freezer is used in compliance with these instructions, it will operate properly and provide you with the greatest satisfaction. These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance. [. . . ] Blue - Neutral: must be connected to the terminal "N" or coloured black. Brown - Live: must be connected to the terminal marked "L" or coloured red. Daily use Temperature adjustment The temperature may be adjusted between -15°C and 24°C. We suggest setting the freezer temperature to 18°C, which guarantees proper freezing and conservation of frozen food. Press button (B) several times until the desired temperature is reached. The temperature on the display flashes and indicates the temperature set. Press button (E) to confirm the desired temperature. The temperature on the display stops flashing again and indicates the temperature inside the freezer. The newly adjusted temperature is reached after several hours. During this time it is normal that the temperature displayed is different from the temperature set. Differences between the temperature displayed and the temperature set are normal, especially when: The temperature setting has recently been adjusted. The lid has been left open for a long time. The buttons on the control panel are now locked. It is possible to de-activate this function at any time by pressing button (D) until the corresponding symbol ( ) flashes on the display again and then by pressing button (E) to confirm the de-activation. Alarm If the freezer temperature is not cold enough, the alarm will beep and the symbol ( ) and the temperature indication will flash on the display. When normal conditions are restored, only the freezer temperature continues to flash. The highest temperature the freezer reached is memorised. Press button (E) to switch the alarm off. The highest temperature reached then appears on the display for some seconds. Then the display returns to showing the temperature of the freezer. The symbol ( ) remains on as long as the temperature in the freezer is higher than the temperature set. The alarm can be due to: Insertion of a large amount of fresh food. A defect in the system, see chapter "What to do if. . . ". Eco Mode function Use this function to automatically set the freezer temperature to its best level (- 18°C), which guarantees proper conservation of frozen food at the lowest energy consumption. Press button (D) several times until the corresponding symbol ( ) flashes on the display. Press button (E) within a few seconds to confirm the Eco Mode activation. [. . . ] Prior to disposing of your old freezer, remove the key from the lock. When not in use Disconnect the appliance from the power supply. Leave the lid slightly open. Changing the light bulb Disconnect the appliance from the power supply. Remove the light cover by pushing a screwdriver against the hook of the cover, as shown in the illustration. Unscrew the bulb, and replace it with a new bulb (max. [. . . ]