User manual AEG-ELECTROLUX AT 1350

[. . . ] If the other clients in your wireless network, such as the Gigaset PC Card 300, likewise support WPS, you can connect with just one click. You will find more detailed information about the wide range of functionalities offered by your Gigaset SE366 WLAN in the electronic user guide on the CD supplied and on the Internet at http://www. U Only use the mains adapter that is supplied with the device. Do not use the device in a damp or wet environment, with dust or vapours. [. . . ] Depending on use, you will first have to make some settings using the browser-based configuration program of your Gigaset SE366 WLAN. To do this, use an Ethernet cable with RJ-45 jacks. You can also use the yellow Ethernet cable supplied with the device. The four LAN connections can automatically set the transmission speed to 10 Mbps Ethernet or 100 Mbps Fast Ethernet, and the transmission mode to halfduplex or fullduplex depending on the performance of the network adapter in your PC. You can then carry out the basic configuration. (If you wish to connect more PCs, please turn to page 26. A wireless connection is made using a wireless network adapter, which must be installed in your PC. You should therefore assign the SSID of the Gigaset SE366 WLAN to the network adapters. the factory set SSID is ConnectionPoint. If the correct SSID has been entered in your PC's wireless network adapter, the wireless link will be established automatically once you connect your Gigaset SE366 WLAN to the mains power supply (see page 21). You should then set the encryption on the Gigaset SE366 WLAN and on the wireless network adapter. Choose the country in the Regional Options window. You can make the settings for The clock to change automatically to summer time and/or to the time zone as you wish. ì Confirm your entry with Next >. ì Select your Internet service provider and enter the access data you received from ì Select the way your Internet connections are to be established: ­ Select Always on if the connection is to remain set up when the Gigaset SE366 WLAN is switched on. Select Connect on demand if applications such as a Web browser or an e-mail program are allowed to connect to the Internet automatically. ­ In the Idle time before disconnect field, enter a period of time after which the Internet connection is to close down automatically if no data is transmitted (default setting: 3 minutes, range: 1 to 99 minutes). This time setting only applies to the Connect on demand option. If you subscribe to a time-based service this will save you high connection charges. The way in which you establish a connection manually is described on page 26. The device will attempt to ì Confirm your entry with Next >. In the next step the basic settings you have made are shown for you to check. [. . . ] Com/customercare It provides you with 24/7 support for all our products. it also provides a list of FAQs and answers plus user guides and current software updates (if available for the product) for you to download. You will also find frequently asked questions and answers in the detailed user guide on the enclosed CD or in the Internet at www. For personal advice on our range of products and assistance with repairs or guarantee/ warranty claims you can contact us on: UK helpdesk: 0 84 53 67 08 12 Ireland: 18 50 77 72 77 Please have your proof of purchase ready when calling with regard to guarantee/warranty claims. [. . . ]