User manual AEG-ELECTROLUX B8871-5-M IT R08

[. . . ] B8871-5 User manual Built-In Electric Oven 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] The time display and core temperature displays a "flashing rectangle" during the calculation phase. Calculation of End Time. 1 Warning: The meat probe is hot!There is a risk of being burned when removing the plug and the tip of the meat probe. Remove the meat probe's plug from the socket and take the meat out of the oven. Switch off the appliance. 40 Using the Oven Checking or changing the core temperature Press the Selection button repeatedly until the function Meat probe flashes and the core temperature set appears in the display. If necessary, change the temperature using or . Checking or changing the oven temperature If necessary, change the temperature using or . Additional functions Clock Functions Clock Time display Cook time/End time/Operating time Selection buttons Clock Functions Meat Probe Using the Oven 41 Countdown To set a countdown. A signal sounds after the time has elapsed. This function does not affect the functioning of the oven. Cook time To set how long the oven is to be in use. End time To set when the oven is to switch off again. Time To set, change or check the time (See also section "Before Using for the First Time"). Heat+Hold The Heat+Hold function keeps your prepared dish warm for 30 minutes, after the baking or roasting process is completed. Cleaning Reminder The Cleaning Reminder detects when pyrolytic cleaning is required and alerts the user to this fact. 3 How to use the clock functions After a clock function has been selected, the corresponding function flashes for about 5 seconds. During this period, the desired times can be set or modified using the or button. When the desired time has been set, the function continues to flash for approx. With Countdown the oven must also be switched on in order to set the clock function. By pressing and at the same time, the time set can be reset. 3 2 Checking the time set or remaining Press the Selection button repeatedly, until the appropriate clock function flashes and the time set or remaining is displayed. Using residual heat with the Cook time and End time clock functions When the Cook time and End time clock functions are used, the oven switches the heating elements off, when 90% of the time set or calculated has elapsed. The residual heat present is used to continue the cooking process until the time set has elapsed (3 to 20 mins. ). 42 Using the Oven Countdown 1. Press the Selection until Countdown button repeatedly flashes. 2. Using the or countdown. button, set the desired After about 5 seconds, the display shows the time remaining. [. . . ] cut-outs, fuses (screw fuses are to be taken out of the holder), RCD's and contactors. Anti-shock protection must be provided by the installation. The built-in unit must meet the stability requirements of DIN 68930. Built-in ovens and built-in cooking surfaces are fitted with special connection systems. [. . . ]