User manual AEG-ELECTROLUX B9871-5-M

[. . . ] B9871-5 User manual Built-In Electric Oven 2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] These remain permanently set, until they are changed again. SMELL FILTER MENU ­ SMELL FILTER ON ­ SMELL FILTER OFF HEAT+HOLD MENU ­ HEAT+HOLD ON ­ HEAT+HOLD OFF EXTRA TIME MENU ­ EXTRA TIME ON ­ EXTRA TIME OFF RAPID HEAT UP MENU ­ RAPID HEAT UP ON ­ RAPID HEAT UP OFF RESIDUAL HEAT MENU ­ INDICATOR ON ­ INDICATOR OFF DISPLAY MENU ­ DISPLAY ON After the appliance is switched off, the time of day is automatically displayed. After the appliance is switched off, the time of day display also goes out automatically. As soon as the appliance is switched on, the display automatically switches itself on. For setting if each press of a button is to be confirmed with a tone. For setting if audible signals for operational steps that cannot be carried out are to be acknowledged with a tone. After the appliance is switched off, the residual heat is automatically indicated. After the appliance is switched off, the residual heat is not indicated. The RAPID HEAT UP MENU function is automatically switched on with suitable oven functions. The RAPID HEAT UP MENU function is not automatically switched on with suitable oven functions. The TIME EXTENSION function is offered when a DURATION was set and has elapsed. The TIME EXTENSION function is not offered. The HEAT+HOLD function is offered in the menu list after a DURATION or END is completed and can be activated. The HEAT+HOLD function is not offered in the menu list. The smell filter is activated, when a baking or roasting process is started. The smell filter only switches itself on for self-cleaning (after about 100 hours). ­ DISPLAY OFF SOUND MENU ­ BUTTON TONE MENU ­ TONE ON ­ TONE OFF ­ ERROR TONE MENU ­ TONE ON ­ TONE OFF LANGUAGE MENU 28 Using the Oven ­ ENGLISH ­ . . . FACTORY SETTINGS ­ RESTORE SETTINGS For setting the language in the display. For restoring all settings to the status as at the time of delivery. Adjusting SETTINGS MENU Using the OPTION button, open the Options menu. Using the arrow buttons or select the menu option SETTINGS MENU. Using the OK button, change to the SETTINGS MENU menu. Using the arrow buttons or go to the setting that you want to adjust. The value currently set appears in the display. Using the arrow buttons or select the desired value. In the display SAVED appears for a few seconds. [. . . ] The two smaller panels first, then the larger panel. 3 Cleaning and Care 45 2. Take hold of the door trim (B) at each side, position it on the inside edge of the door and plug the door trim (B) into the upper edge of the door. 3 On the open side of the door trim (B) there is a guide bar (C). This must be pushed between the outer door panel and the guide corner (D). The clip seal (E) must be snapped in. 3. [. . . ]