User manual AEG-ELECTROLUX B9931-5-A EU R08

[. . . ] B9931-5 User manual Built-In Electric Oven 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] After the appliance is switched off, the time of day display also goes out automatically. As soon as the appliance is switched on, the display automatically switches itself on. For setting if each press of a button is to be confirmed with a tone. For setting if audible signals for operational steps that cannot be carried out are to be acknowledged with a tone. After the appliance is switched off, the residual heat is automatically indicated. After the appliance is switched off, the residual heat is not indicated. The RAPID HEAT UP MENU function is automatically switched on with suitable oven functions. The RAPID HEAT UP MENU function is not automatically switched on with suitable oven functions. The TIME EXTENSION function is offered when a DURATION was set and has elapsed. The TIME EXTENSION function is not offered. The HEAT+HOLD function is offered in the menu list after a DURATION or END is completed and can be activated. The HEAT+HOLD function is not offered in the menu list. The smell filter is activated, when a baking or roasting process is started. The smell filter only switches itself on for self-cleaning (after about 100 hours). DISPLAY OFF SOUND MENU BUTTON TONE MENU TONE ON TONE OFF ERROR TONE MENU TONE ON TONE OFF 38 Using the Oven LANGUAGE MENU ENGLISH . . . FACTORY SETTINGS RESTORE SETTINGS For restoring all settings to the status as at the time of delivery. For setting the language in the display. 1. 7. Adjusting SETTINGS MENU Using the OPTION button, open the Options menu. Using the arrow buttons or select the menu option SETTINGS MENU. Using the OK button, change to the SETTINGS MENU menu. Using the arrow buttons or go to the setting that you want to adjust. The value currently set appears in the display. Using the arrow buttons or select the desired value. [. . . ] If you do not, any damage resulting is not covered by the warranty. 1 Safety information for the installer The electrical installation is to be set up so that the appliance can be isolated from the mains with a minimum 3mm all-pole contact separation. Suitable separation devices include e. g. cut-outs, fuses (screw fuses are to be taken out of the holder), RCD's and contactors. Anti-shock protection must be provided by the installation. [. . . ]