User manual AEG-ELECTROLUX B9971-5-M EU R08

[. . . ] B9971-5 User manual Built-In Electric Oven 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] FACTORY SETTINGS RESTORE SETTINGS For restoring all settings to the status as at the time of delivery. For setting the language in the display. 1. 7. Adjusting SETTINGS MENU Using the OPTION button, open the Options menu. Using the arrow buttons or select the menu option SETTINGS MENU. Using the OK button, change to the SETTINGS MENU menu. Using the arrow buttons or go to the setting that you want to adjust. The value currently set appears in the display. Using the arrow buttons or select the desired value. In the display SAVED appears for a few seconds. Afterwards, you will find yourself back in the Oven Functions menu. 37 Everyday use of the SETTINGS MENU 3 3 3 Smell filter The energy consumption is higher when the smell filter is activated. If the smell filter is deactivated in the SETTINGS MENU menu, it will automatically switch itself on after 100 operating hours, during a baking or roasting cycle, in order to self-clean. During pyrolytic cleaning, the smell filter switches itself on automatically, even if it is deactivated in the SETTINGS MENU menu. Heat+Hold The Heat+Hold function keeps your prepared dish warm for 30 minutes, after the baking or roasting process is completed. This is helpful, for example, if your guests are late. Pre-condition for Heat+Hold: Set temperature is above 80C Fixed duration Switching on Heat+Hold 1. Select oven function, meat programme or automatic programme. If necessary, set duration or core temperature. Press the SELECTION button repeatedly until HEAT+HOLD flashes. The Heat+Hold function is now switched on. As soon as the function is completed, a signal sounds and Heat+Hold starts. The function set runs at 80C for 30 minutes. After 30 minutes with Heat+Hold are over, the oven switches itself off. [. . . ] cut-outs, fuses (screw fuses are to be taken out of the holder), RCD's and contactors. Anti-shock protection must be provided by the installation. The built-in unit must meet the stability requirements of DIN 68930. Built-in ovens and built-in cooking surfaces are fitted with special connection systems. [. . . ]