User manual AEG-ELECTROLUX BE3013001M

[. . . ] Installation Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice 4 Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: · For your personal safety and the safety of your property · For the respect of the environment · For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage. Children and vulnerable people safety · This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved. [. . . ] Touch until the display shows "00:00" and the Count Up Timer starts to count up again. You can not use Count Up Timer when Duration or End is set. Setting the DURATION 1. Activate the appliance and set an oven function and temperature. Touch again and again until the display shows . Use If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. Touch any sensor field or open the oven door to stop an acoustic signal. Deactivate the appliance. Setting the END 1. Activate the appliance and set an oven function and temperature. Touch again and again until the display shows . Clock functions flashes in the display. Use an automatic programme or recipe when you do not have a knowledge or experience how to prepare a dish. You can find the recipes for the automatic programmes in the "Recipe book". There are three types of automatic programmes: · Automatic recipes; · Automatic programmes with weight input; · Automatic programmes with core temperature sensor; Automatic recipes Setting an automatic recipe: 1. Touch two times until the display shows . The display shows symbol and number of the automatic programme. Touch or the automatic recipe activates automatically after five seconds. When set time ends, an acoustic signal operates for two minutes. Touch any sensor field or open the oven door to stop an acoustic signal. Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. Touch again and again until the display shows . or to set the weight programme (refer to "Recipe book"). Touch The display shows: cooking time, duration symbol , a default weight, a unit of measurement (kg, g). [. . . ] Refer to "Safety information" chapter. Problem The appliance does not heat up Possible cause The appliance is deactivated The time of day is not set. The necessary settings are not set The automatic switch-off is activated The fuse is released Solution Activate the appliance Set the clock. Refer to "First setting the time of day" Make sure, the settings are correct Refer to , , Automatic switch-off" Make sure, if the fuse is the cause for the malfunction. If the fuse releases again and again, refer to an authorized electrician Deactivate the "Demo" function. [. . . ]