User manual AEG-ELECTROLUX BE7714000M

[. . . ] BE7614000 BE7714000 EN OVEN USER MANUAL 2 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. . . Visit the webshop at: www. aeg-electrolux. com/shop Contents 3 CONTENTS 4 8 9 11 12 14 16 17 19 21 26 27 29 Safety information Product description Control panel Before first use Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if. . . [. . . ] or to set END (first you set minutes and then hours) and or 3. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. Touch any sensor field or open the oven door to stop an acoustic signal. Deactivate the appliance. 15 to con- Setting the SET+GO To start of the appliance with necessary settings with only one touch of the sensor field, any time later. Set an oven function (or programme) and temperature (refer to "Setting the oven function" and "Changing the oven temperature"). Set DURATION (refer to "Setting the DURATION"). Touch again and again until will flash in the display. This dot shows which clock function is activated. Touch any sensor field (apart from ON/OFF) to start the SET+GO function. You can use SET+GO function only if DURATION is set. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END "). When the Time delay function is activated the display shows static symbol of the oven function, with a dot and . The dot shows which clock function is on in the Clock/ Residual heat display. Setting the MINUTE MINDER Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the appliance is off. and "00" flash in the display. Use First you set seconds and then minutes and hours. When set time ends, an acoustic signal operates for two minutes and "00:00" and flash in the display. 16 Automatic programmes 5. Touch any sensor field or open the oven door to stop an acoustic signal. AUTOMATIC PROGRAMMES WARNING!Refer to "Safety information" chapter. There are 20 automatic programmes and recipes. [. . . ] Touch and hold until an acoustic signal sounds (for minimum 5 seconds). Touch and hold and at the same time for 2 seconds until an acoustic signal sounds. Replace the oven lamp. The "Demo" function is on. The oven lamp does not operate The display shows C2 The oven lamp is defective You want to start the Keep Remove the core temperature sensor plug from the warm or Defrost function socket. but you did not remove core temperature sensor plug from the socket. [. . . ]