Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AEG-ELECTROLUX BELLA2100. We hope that this AEG-ELECTROLUX BELLA2100 user guide will be useful to you.
Lastmanuals help download the user guide AEG-ELECTROLUX BELLA2100.
Manual abstract: user guide AEG-ELECTROLUX BELLA2100
Detailed instructions for use are in the User's Guide.
[. . . ] ÖKO-LAVAMAT BELLA 2100
The environmentally friendly washing machine Instruction booklet
OKO-LAVAMAT
1000 900 700 400
F D C B A
30 40 95
E
60 50 40 30
BELLA 2100
30
40
40
40
60 50
AUS ERFAHRUNG GUT
Dear customer,
Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. This symbol guides you, step by step, in the operation of the appliance. [. . . ] When the START/PAUSE button is pressed, the selected delay will appear again on the display and the machine starts its countdown.
23
How to wash
Starting the programme
1. Press START/PAUSE to start the programme. If the Delay Start option has been selected the programme will start at the end of the countdown. If the door light is red and flashing at the start of the programme it indicates that the door is open. Close the door and press the START/PAUSE button again. If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to modify or cancel the delay time. · Load other laundry: press the START/PAUSE button. Close the door and press the START/PAUSE button again. · Modify or cancel the delay time: press the START/PAUSE button. Press the DELAY START button until the time required appears on the display, or 0h, if you wish to cancel it. Press the START/ PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.
PREWASH MAIN WASH RINSES EXTRA RINSE SPIN END OVERDOSAGE
Display
The time to the end of the programme decreases minute by minute and appears on the display.
At the end of the programme
The machine stops automatically. The END light comes on in the programme progress display.
24
How to wash
If the light (OVERDOSAGE) comes on it indicates that too much detergent has been used. At the next wash carefully follow the detergent manufacturer's instructions. Measure out detergent according to amount, type, degree of soil of fabrics and water hardness. This light could come on also when the drain filter is blocked. If the RINSE HOLD option has been selected, the water must be emptied out before opening the door either - by pressing the START/PAUSE button (the laundry will be spun at the speed corresponding to the selected type of fabrics. The spin speed can be reduced by means of the SPIN SPEED button) - or by selecting the spin speed and depressing the START/PAUSE button - or by turning the selector dial to O and then to DRAIN "C" and pressing the START/PAUSE button again. In this case the water will be emptied, but the laundry is not spun. Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e. g. shrinking) or their colour running into a load of whites. [. . . ] The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
41
Installation
Permanent connection
In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point. This operation must be performed by a qualified electrician. Important: The power supply cable must be easily accessible after installing the machine.
Door reversal
The opening direction of the outer door on this machine can be reversed. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX BELLA2100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX BELLA2100 will begin.