User manual AEG-ELECTROLUX BOOMERANG

[. . . ] QUICK START GUIDE UK DE FR NL IT SW PL GR ES PT DECT Telephone Boomerang 10 V1 P1 P3 P4 12 2 1 3 7 8 9 13 5 4 6 10 11 P5 P2 1 BECAUSE WE CARE UK Thank you for purchasing this product. This product has been designed and assembled with utmost care for you and the environment. This is why we supply this product with a quick installation guide to reduce the number of paper (pages) and therefor save trees to be cut for making this paper. A full and detailed user guide with all the features descripted can be found on our website www. [. . . ] To select the desired entry in the call log and then press to dial out the selected redial to dial out the selected call log 6. 5 Call from the Phonebook to dial out the selected • Press in standby mode. € Press to select the desired entry in the phonebook and then press phonebook number. 2 Answer and End a Call • When the phone rings, press on your handset. • To end a conversation , press on your handset. Warning: When the handset is ringing, please do not hold it too close to your ear as the volume of the ringing tone may damage your hearing. Note: You can simply place the handset back on its base station to end the call, provided you have not deactivated the Auto hang-up feature. 4 Adjust Earpiece Volume There are 5 levels of earpiece volume on your Handset. € During a call, press to select from “VOLUME 1” to “VOLUME 5”. > >When you end the call, the setting will remain at the last selected level. € During a handsfree call, press to select from “VOLUME 1” to “VOLUME 5”. > >When you end the call, the setting will remain at the last selected level. 6 Mute/Unmute the Microphone • When the microphone is muted, the handset displays “MUTE ON” and your caller cannot hear you. € During a call, press to turn on/off the microphone. 7 Paging The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. >All the registered handsets that are in range will start to ring. > You can stop the paging by pressing any key on a handset or the key under the base unit again. 8 Switching the Handset On/Off Press and hold on your Handset for more than 2 seconds to switch the handset on or off in standby mode. >When first turned on, the display shows “SEARCHING…” until the handset finds the base. > UK Note: You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log. Note: You can switch the handset off to save battery life, if the handset is not on the base. IMPORTANT: When the handset is “OFF”, it cannot be used for making calls including emergency calls. [. . . ] 1 While the unit is under Guarantee • Disconnect the base unit from the telephone line and the mains electricity supply. € Pack up all parts of your device, using the original package. € Return the unit to the shop where you bought it, making sure you take your sales receipt. 2 After the Guarantee has expired If the unit is no longer under Guarantee, contact us via www. [. . . ]