User manual AEG-ELECTROLUX BOSS7116

[. . . ] There are certain conditions which may invalidate this guarantee: WARNING To reduce the risk of fire, electric shock, or injury: · Do not use out doors or on wet surfaces. · Do not leave vacuum cleaner when plugged in. · Do not allow to be used as a toy. Close attention is necessary when used near children. [. . . ] The cutoff plug should then be disposed of to pre- · Ensure the lengths of wire inside the plug are prevent hazard of shocks in case it should be plugged into pared correctly. a 13 Amp socket in another part of your home · Connection should be firmly made after all conductor stands are entered into the terminal posts. The wires in the mains cable of this appliance are · When preparing the cable ends take care not to damcoloured in accordance with the following code: age the outer seal, or insulation surrounding the inner Blue: Neutral. · Replace the top cover of the plug and secure. As the colours of the wires in the mains cable of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to SAVE THESE INSTRUCTIONS The Electrolux Group, 101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ Features of the BOSS vacuum cleaner and accessories with it are protected in Great Britain and abroad by Patents of Registered Designs. This appliance conforms with the requirements of the amended E. E. C. 89/336/EEC relating to electromagnetic compatibility (EMC) CE. The Electrolux Group may introduce modifications to their product from time to time, and consequently the details given in this booklet are subject to alteretion without notice. 7106, 7116 7106, 7116 MAINTENANCE REMOVING THE CONTENTS OF THE DUST CONTAINER Always operate the cleaner with the dust container installed. Remove the dust container by using the open button on the handle. 20) Remove the filter set by pushing the button. 21) Remove the contents of the dust container. 22) Insert the filter set back into the dust compartment. Insert the dust compartment back into the cleaner by pressing it down until it clicks. BLOCKED AIRFLOW AND DIRTY FILTERS The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Disconnect from mains and allow the cleaner to cool for 45-60 minutes. REPLACING THE FILTERS The dust container must be emptied if the window of the dustbag full indicator is illuminated when the cleaner is operating at maximum power and the nozzle is raised from the floor. Filters should be replaced at least twice a year or when they become visibly soiled. Always operate the cleaners with filters installed to avoid reduced suction. Disconnect from electrical outlet before cleaning filters. Replacing the cartridge filter Remove the dust container by using the open button on the handle. 20) Remove the filter set by pushing the button. 21) Remove the cartridge filter by turning it counter-clockwise (A) and pull it out (B). [. . . ] Before you start using the vacuum cleaner, please remove large or sharp objects from the floor in order to prevent damage to the dust container and hose. SERVICE Should you require service on your Boss cleaner, please telephone the Electrolux Group Floorcare Helpline on 08706 055 055. PROTECTING THE ENVIRONMENT Attempt to recycle packaging material and old appliances. The cardboard packaging can be placed in the waste paper collection. Deposit the plastic bag made of polyethylene (PE) at the PEcollection point for recycling. Recycling the appliance at the end of its life: The plastic components all carry a material identification marking so that, like the other materials, they can by recycled at the end of the life of the appliance. [. . . ]