User manual AEG-ELECTROLUX BS 12 C IQ

[. . . ] If needed, an exploded view of the tool can be ordered. As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. SYMBOLS Please read the instructions carefully before starting the machine. Typically, the A-weighted noise levels of the tool are: Sound pressure level (K = 3 dB(A)) . [. . . ] The battery can be stored permanently in the charger without the danger of being overcharged. If both LEDs flash at the same time, either the battery has not been completely mounted or there is a fault in the battery or the charger. For safety reasons you must stop using the charger and battery immediately and have them inspected by an AEG Customer Service Centre. Remove the battery pack before starting any work on the machine. *1Measured according to AEG norm N 877318 *2 The values stated are reference values. This tool is only suitable for indoor use. WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. The following battery packs can be charged with this charger: voltage battery rating No. Of (of storage battery) battery cells 12 V L1215 <=1, 5 Ah 3 Do not try to charge non-chargeable batteries with this charger. No metal parts must be allowed to enter the battery section of the charger (short circuit risk). Never break open battery packs and chargers and store only in dry rooms. Do not touch the tool with conducting objects. Before use check machine, cable, and plug for any damages or material fatigue. [. . . ] Do not dispose of used battery packs in the household refuse or by burning them. AEG Distributors offer to retrieve old batteries to protect our environment. Do not store the battery pack together with metal objects (short circuit risk). use only System PCLS chargers for charging System PCLS battery packs. [. . . ]