User manual AEG-ELECTROLUX C81700K-MNX06

[. . . ] C81700K Glaskeramik-Kochfeld Glaskeramische kookplaat Taque de cuisson vitrocéramique Ceramic glass hob Montage- und Gebrauchsanweisung Montage- en gebruikshandleiding Instructions de montage et mode d'emploi Installation and Operating Instructions Dear Customer, Please read these operating instructions carefully. Above all, please observe the "safety" section on the first few pages. Please retain these operating instructions for future reference. Pass them on to any subsequent owners of the appliance. [. . . ] Select the required cooking zone with the cooking zone sensor fields. Touch sensor field + until it reaches the required heat !The set heat setting will be displayed first. After five seconds a (= automatic warm up function) will replace the heat setting in the display. At the end of the warm up time the heat setting will be shown again. 3 If during the automatic warm up function you select a higher setting, eg. from # to %, the warm up time is adjusted to match. If you select a lower setting, the warm up time ends at once. 113 Operating Instructions 2 3 If you start cooking again on a cooking zone that is still warm, the automatic warm up function uses the residual heat. If you again wish to switch on a cooking zone on which hot items are already standing, you should always select the required heat setting with the - sensor field. In this way you can avoid making the food boil over as a result of the extra burst of heat from the automatic warm up. Cooking without the Automatic Warm up Function If you wish to use the cooking zone without automatic warm up, select the required heat setting with the - sensor field. Switch on the appliance and select the desired cooking zone using the cooking zone selection buttons. Touch sensor field - to select the required heat setting from ) to !. 3 You can adjust the heat setting at any time using the + and - buttons, providing the cooking zone has been selected. Switching off a cooking zone 0 1. Select the desired cooking zone using the cooking zone buttons. Press the + and - buttons simultaneously to switch off. 1 When the rings are still hot cooking should be carried out without automatic warm up. 114 Operating Instructions Locking/Unlocking the Control Panel With the exception of the "On/Off" sensor field the control panel can be locked at any required time during cooking in order to prevent adjusting the settings such as when wiping over with a cloth. This function is also suitable as a child safety feature. Touch the o sensor field until the control indicator comes on. 2. To release the lock touch the o sensor field again continuously until the control indicator goes out. 3 Child safety feature!If the hob is completely switched off using the "On/Off" sensor field while the lock is on, then the lock will still be active when the hob is switched on again. To reactivate the cooking zones, the locking function must be cancelled as described above. 115 Operating Instructions Timer A cooking duration can be set with the integrated timer for all cooking zones. When the end of the cooking duration is reached, the cooking zone switches itself off automatically. Using the cooking zone sensor field, select the required cooking zone and set the required heat setting. Touch the TIMER W sensor field to activate the timer function for this cooking zone. Using the + or - sensor fields set or adjust the required period of time until the zone is to switch off automatically (eg. [. . . ] ­ more than 10 seconds have elapsed between operating the On/Off button and switching on the desired cooking zone, (see section "Switching on the appliance"). ­ the sensor fields are partially covered by a damp cloth or with liquid. the display suddenly changes to j or h for residual heat?Check whether ­ the On/Off button has been operated accidentally. [. . . ]