User manual AEG-ELECTROLUX CF502B

[. . . ] Information in the display will guide you step by step through the procedure. The excellent, individual taste is achieved by the pre-brewing system: prior to the actual brewing process, the ground coffee is moistened to extract its full aroma, the individually adjustable amount of water per cup that can be varied between a small espresso and a large coffee with crema, the individually adjustable coffee temperature at which the coffee is brewed, the facility to choose between normal or strong coffee, the grinding texture that can be adjusted to suit the roasting of the beans, and last but not least, through the guaranteed crema, that small crown of froth that makes an espresso incomparable for connoisseurs. Incidentally: the time for which the water is in contact with the ground coffee is considerably shorter for espressos than for conventional filter coffee. As a result, less bitterness is released from the coffee; it is this that makes espresso coffee so much pleasanter! Table of Contents Safety Instructions Before Using for the First Time Setting up the Appliance Cable Compartment (Figure 3) Programme Selector (Figure 1/Q) Prior to Making Coffee Filling the Water Tank (Figure 5) Filling the Bean Container (Figure 6) 2. 3. [. . . ] Setting Coffee Temperature 0 Turn the programme selector to Position 2. "TEMPERATURE REGULAR" appears in the display. 0 Press the P-button on the programme selector. "TEMPERATURE HIGH" appears in the display. 0 Turn the programme selector to Position 1 to store the displayed value. 27 g 4. Frothing Milk (Figures 13 to 17) Hot steam can be used both for frothing milk for cappuccino and for heating liquids. 0 Turn the steam selector clockwise to the "Steam" position (Figure 16/A). "HEATING UP" appears in the display. After a short while the display "STEAM READY" appears. "STEAM" appears in the display. Important: Using the knob for regulating the froth (Figure 2/A) you can set the amount of froth (more or less added air) and the temperature of the milk to your taste (Figure 15/A, B, C). 0 Attach the flexible hose to the frothing nozzle and insert the other end of the flexible hose into the cold milk (Figure 17). 0 Place an empty cup underneath the frothing nozzle (Figure 23). 3 28 g 0 Turn the steam selector to the "Steam" position. "HEATING UP" appears in the display. After a short while "STEAM READY" appears in the display. 0 Immerse the nozzle about half way down inside the container with the liquid to be heated so that the air can be drawn in unhindered. "STEAM" appears in the display. 0 You can stop the outlet of steam ­ by turning the steam selector anticlockwise to return it to the 0 position, or ­ by pressing the coffee selection button. "SET STEAM/WATER DIAL TO ZERO" appears in the display. The coffee that was selected last appears again in the display. Please clean the frothed milk spout particularly thoroughly after heating (for information refer to Section 8, Cleaning). 0 You can stop the flow of hot water by turning the steam selector clockwise back to the O position. [. . . ] 2 hours before switching on the appliance again!If this malfunction continues to be displayed, please contact customer service. "SERVICE 5" or "SERVICE 8" appears in the display: ­ Switch off the appliance, unplug from the mains, plug into the mains again, and switch on the appliance again. If this malfunction is no longer indicated, the appliance is again ready for use. [. . . ]