User manual AEG-ELECTROLUX CG 6200

[. . . ] 6 Carrying out the descaling programme 15 Ordering accessories 16 What to do when the display show the following messages. 2 Rinsing 8 9 Making several cups of coffee with the jug function Makingcoffee with ground coffee 47 48 48 49 49 49 50 10 Making cappuccino or hot milk (coffee and milk froth) 10. 17 Solvable problems, before calling customer services 60 18 Technical data 19 Waste disposal 20 Work under warranty 62 62 62 Key to picture front view (Figure 1) Drip tray grill Warming jug Main switch (on back of appliance) Height adjustable coffee dispenser Control panel (see Figure 3) Coffee bean holder cover Ground coffee chute cover Heated cup tray Hot water nozzle (removable) Button to open service door Water tank with maximum mark (removable) M Drip tray with float (removable) Front view with open service door (Figure 3) O Service door (open) P Waste coffee container (can be taken out) Q Swing drawer R Brewing unit S Button for setting grind level T Coffee bean container U Measuring spoon V Filling chute for preground coffee W Nameplate (bottom of appliance) X Liquid descaler Y Test strips "Coffee strength / preground coffee" knob "Cup size" knob Display "1 cup of coffee" button In menu mode this button is used for "scrolling" ("<") "2 cups of coffee" button In menu mode this button is used for "scrolling" (">") "Hot water" button In menu mode this button confirms the menu option ("OK") "MENU" button In menu mode this button returns to the last level without making changes ("ESC") "On/Off" button "Jug/Cappuccino" button Milk container Cover (removable) Slider for extra milk froth "CLEAN" button Milk dispenser pipe (removable) Suction pipe (removable) Your fully automated machine could not be easier tooperate, both for making coffee and taking care of it. The exquisit, individualtaste is attributed to the pre-brewing system: before the actual brewing process starts, the ground coffee is moistened to make the most of the whole flavour, the individually adjustable amount of water per cup, from short espresso to "long" coffee with crema, the individually adjustable coffee temperature, with which the coffee is brewed, the choice between a normal or strong cup of coffee, the adjustable grind level depending on the roast of the beans, and last but not least the guaranteed crema, that frothy head that makes espresso coffee so incomparable for connoisseurs. [. . . ] Foreign bodies in the mill mechanism, such as small stones, can damage the mechanism. A foreign body in the coffee causes an even rattling noise. If you hear this noise during the milling process, switch the appliance off immediately and consult customer services. The display automatically jumps back to the menu option «CHOOSE LANGUAGE» after programming. 0 To go back to the coffee mode, press the "MENU" button (Figure 5)or wait about 120 seconds until the appliance automatically jumps back to coffee mode. You can choose between three temperature levels. The coffee temperature levels are defined as follows: «TEMPERATURE LOW» «TEMPERATURE MEDIUM» «TEMPERATURE HIGH» The factory setting is «TEMPERATURE HIGH». You can change this as follows: 0 Press the "MENU" button (Figure 5). 0 If necessary, select another temperature with the scrolling buttons "<" or ">" (Figure 6). 0 If necessary, select another switch-off time with the scrolling buttons "<" or ">" (Figure 6). If "OK" is not pressed, the appliance automatically returns to the coffee mode after about 120 seconds without saving the entries. If necessary, select another cup size with the scrolling buttons "<" or ">" (Figure 6). When the desired cup size is displayed, confirm it with the"OK" button (Figure 6). A bar appears on the display, which can be made bigger or smaller; this represents the cup filling quantity. If necessary a different filling quantity can be selected using the scrolling buttons "<" or ">" (Figure6) in 10 steps. When the bar if completely full, this represents the max. Cup filling quantity for the jug programme of about 125 ml. 0 When the desired filling quantity is displayed , confirm itwith the"OK" button (Figure 6). This filling quantity is now programmed in. If "OK" is not pressed, the appliance automatically returns to the coffee mode after about 120 seconds without saving the entries. The display automatically jumps back to the menu option «JUG OR CUP LEVEL» after programming. 0 To go back to the coffee mode, press the "MENU" button (Figure 5) twice or wait about 120 seconds until the appliance automatically jumps back to coffee mode. [. . . ] Keep the original packaging to protect it during transport. Always use the original plastic bag to protect against scratches. Protect the appliance and jug from being banged. No liability can be assumed for damage caused during transport. [. . . ]