User manual AEG-ELECTROLUX CG6400 (WEST)

[. . . ] Customer g Dear read this user manual carefully, Please Paying special attention to the safety notes!Keep the manual in a safe place for later reference, and pass it on to any new owner. 4 Setting the jug program (coffee strength and fill level for jug function) 13. 5 Setting the coffee program (Programming the fill level) 13. [. . . ] 0 After you have dispensed the hot water 13. 1 turn the knob for steam and hot water back to the position (Fig. You can choose between several languages. Another language can be selected as follows: Press the "Menu" key (Fig. Confirm the menu item with the "OK" key (Fig. When the desired language is displayed, confirm it with the "OK" key (Fig. If "OK" is not pressed, after about 120 sec. The appliance returns automatically to the coffee mode without storing the setting. If you find that coffee delivery is either too fast or too slow (in drips), the grinding texture can be adjusted during the grinding process. The grinder setting may be changed only while coffee is being ground. Making adjustments to the stationary grinder can damage the coffee machine. If the coffee is delivered a drop at a time or not at all, turn the knob one click clockwise. Turn one click at a time until the coffee is delivered satisfactorily. ⷠIf the coffee is delivered too fast and the crema is not to your tase, turn the knob one click anticlockwise. 0 To return to the coffee mode, press the "Menu" key (Fig. For the machine to return automatically to the coffee mode. There are three temperature levels to choose from. The coffee temperature levels are defined as follows: «TEMPERATURE LOW» «TEMPERATURE MEDIUM» «TEMPERATURE HIGH» The factory setting is «TEMPERATURE HIGH». You can change this setting as follows: Press the "Menu" key (Fig. Confirm the menu item with the "OK" key (Fig. Where necessary, select a different temperature, using the scrolling keys "<" or ">" (Fig. When the required temperature is indicated, confirm this with the "OK" key (Fig. [. . . ] The "Coffee strength / Pre-ground coffee" knob has not been turned to the or position and the appliance has used both the ground coffee that has been added and the coffee that has been ground by the grinder. Thoroughly clean the inside of the appliance, as described in , , Cleaning the brewing unit", page 51. Repeat the operation, first turning the "Coffee strength / Pre-ground coffee" knob as described in , , Using pre-ground coffee", page 43. Ground coffee has been added when the appliance was switched off. [. . . ]