User manual AEG-ELECTROLUX DD8691-MR

[. . . ] Do not flambè under the range hood; risk of fire · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Switch off or unplug the appliance from the mains supply before carrying out any maintenance work. Clean and/or replace the Filters after the specified time period (Fire hazard). [. . . ] Clean the hood using a damp cloth and a neutral liquid detergent. On the product or on its packaging indicates that this product may not be treated as household waste. Instead The symbol it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. Draw a horizontal line at 650 mm above the hob. 1 on the wall as shown about 1-2 mm from the ceiling or upper limit align-ing the centre (notch) with the vertical reference line. 1 on the wall as shown at X mm below the first bracket (X = height of the upper chimney section supplied), aligning the centre (notch) with the vertical line. Mark a reference point as indicated at 116 mm from the vertical reference line and 330 mm above the horizontal reference line. Repeat this operation on the other side. To deactivate this function, simply press the button until the option selected is 0 or turn the motor off. Turns the hob lighting system on and off Indicates the need to wash the metal grease filters. The alarm is triggered after the Hood has been in operation for 100 working hours. This indication is only visible when the motor is turned off. To reset the alarm: Turn the motor off and press button D for approximately 3 seconds, until the display turns off. Indicates the need to change the activated charcoal filters, and also to wash the metal grease filters. The alarm is triggered after the Hood has been in operation for 200 working hours. This indication is only visible when the motor is turned off. This indication must be activated following the procedure described in the section on maintenance of the activated charcoal filter. To reset the alarm: Turn the motor off and press button D for approximately 3 seconds, until the display turns off. They need to be washed when F-sign appears on the display or in any case every 2 months, or even more frequently in case of particularly intensive use of the hood. [. . . ] To reset the alarm: Turn the motor off and press button D for approximately 3 seconds, until the display turns off. They need to be washed when F-sign appears on the display or in any case every 2 months, or even more frequently in case of particularly intensive use of the hood. Remove the filters one by one pushing them towards the back side of the hood unit and simultaneously pulling downwards. Any kind of bending of the filters has to be avoided when washing them. [. . . ]