User manual AEG-ELECTROLUX EA3140BR-WS

[. . . ] Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. aeg. com Register your product for better service: www. aeg. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. aeg. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice. ENGLISH 3 1. [. . . ] Steam programmes do not perform any hygienic cycle. 1) If you set a Steam programme with dried laundry, at the end of the cycle the laundry feels humid. It is better to expose clothes to the fresh air for about 10 minutes to let the humidity dry. Laundry should be removed from the drum as quick as possible. After a steam cycle, clothes may to be ironed anyway, but with less effort! 6. 1 Woolmark Certificate The wool wash of this machine has been tested and approved by The Woolmark Company for the washing of wool containing garments labeled as «hand wash» provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M1145 In UK, Eire, Hong Kong and India the Woolmark symbol is a certification trademark. ©The Woolmark Company Pty Ltd. 7. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. Programmes Load (Kg) Energy con- Water consumption sumption (li(kWh) tre) Approximate programme duration (minutes) 180 170 105 85 60 Remaining moisture (%)1) Cottons 60 °C Cottons 40 °C Synthetics 40 °C Delicates 40 °C Wool/Hand wash 30 °C 6 6 3 3 1 1. 10 0. 60 0. 45 0. 51 0. 33 56 54 45 46 46 52 52 35 35 30 ENGLISH 13 Programmes Load (Kg) Energy con- Water consumption sumption (li(kWh) tre) Approximate programme duration (minutes) Remaining moisture (%)1) Standard cotton programmes Standard 60 °C cotton Standard 60 °C cotton Standard 40 °C cotton 6 3 3 0. 83 0. 55 0. 42 44 33 33 182 145 129 52 52 52 1) At the end of spin phase. Off Mode (W) 0. 48 Left On Mode (W) 0. 48 The information given in the charts above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. 8. BEFORE FIRST USE Put a small quantity of detergent in the main wash compartment of the detergent dispenser. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. 9. To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. 5. 9. 6 Change a function You can change only some functions before they operate. 1. Press button 4 to start the programme. The drain pump can operate for a short time when the appliance fills water. Press button 4 . Change the function set. 9. 7 Set the delay start 1. 9. 4 Interrupt a programme 1. The washing programme continues. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. 2. 16 www. aeg. com Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. 9. 8 Cancel the delay start 1. Press button 5 again and again until the display shows 0’. The programme starts. • The acoustic signals operate. • The indicator of the Start/Pause button 4 goes off. [. . . ] Set the drain programme. Set the drain programme. Close the door correctly. • Disconnect the appliance. Set the spin programme. 22 www. aeg. com Problem Possible cause The filter of the drain pump is blocked. Balance problems with the laundry load. Possible solution Clean the filter of the drain pump. [. . . ]