User manual AEG-ELECTROLUX EA3210

[. . . ] Return the product to your local recycling facility or contact your municipal office. VISIT OUR WEBSITE FOR: - Products - Brochures - User manuals - Trouble shooter - Service information www. aeg. com LEGEND Warning - Important Safety information. General information and tips Environmental information Subject to change without notice. ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. [. . . ] Contact your local water authority to know the water hardness in your area. Processing residues can stay in the appliance. Do not use detergent and do not load the baskets. If you use the combi detergent tablets, activate the multitab function. These tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area. Refer to the instructions on the packaging of the products. ADJUSTING THE WATER SOFTENER Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The water softener neutralises these minerals. The dishwasher salt keeps the water softener clean and in good conditions. Refer to the table to adjust the water softener to the right level. It makes sure that the water softener uses the correct quantity of dishwasher salt and water. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. Make sure that the release button locks into position. 1. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). 14 www. aeg. com DAILY USE 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. Set and start the correct programme for the type of load and soil. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. [. . . ] Make sure that the programme is applicable for the type of load and soil. Make sure that the position of the items in the baskets is correct and that the water can easily wash all items. Make sure that the position of the items in the baskets is correct and does not cause the blockage of the spray arms. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. [. . . ]