User manual AEG-ELECTROLUX EA3280

[. . . ] Transit damage must be reported to the company responsible for transport within seven days, at the latest, following delivery of the goods. TYPE PLATE The type plate is afixed to the interior of the refrigerator and bears, amongst other information, the following details: type model description product number serial number This information must be produced should it become necessary to contact customer service. We recommend that you write these details down here. Further technical information can be found in the paragraph entitled TECHNICAL DATA in these instructions. INSTALLATION It is important that the refrigerator should not be exposed to heat radiation from hot appliances (e. g. [. . . ] This is carried out as follows: *** Set the thermostat at 0', disconnect at the mains, remove food and ice dish and leave the doors open. Do not expose the refrigerator to external heat and do not attempt to scratch away the frost with sharp objects. The drained water runs in a groove and from there continues along a pipe through the refrigerator's rear panel and into a collection container on the cooling unit, where the water evaporates by itself. Should the frost layer become very thick, there is a danger of the collection basin overflowing. In this case the water should be absorbed by a cloth placed under the ribs. The water in the freezer compartment should also be absorbed by a cloth. Following defrosting, the refrigerator should be wiped dry with a cloth, reconnected and the food returned. However, you should wait until the following day before freezing ice cubes. MAINTENANCE INSTRUCTIONS Set the thermostat at 0' and disconnect at the mains. Defrost the refrigerator as detailed above. Remove loose parts (shelves, supports, etc. ), rinse and dry. Dampen a cloth with lukewarm water (and possibly add a mild cleaning agent) and wipe out the refrigerator from inside. Wipe the doors' PVC seals with a damp cloth and rub them with talcum powder from time to time. Never use scouring agents, harsh cleaning agents, heavily perfumed products, wax or similar items. Occasionly remove the dust from the cooling unit at the rear of the refrigerator, especially from the pipe coils and from between the ribs. Always ensure that the refrigerator is disconnected at the mains before carrying out this routine maintenance. PUTTING OUT OF SERVICE Should the refrigerator not be in use for some time, it should be disconnected. Set the thermostat at 0' and disconnect at the mains. [. . . ] 29 kg Electrical data connection current, 230V. . . . . . . . . . . . 1, 6 kWh The appliance does not contain any CFCs/HCFCs. Sodium chromate is used for corrosion protection (less than 2 weight % of the coolant). RECYCLING After unpacking the appliance, the packing materials should be delivered to a local collection site. [. . . ]