User manual AEG-ELECTROLUX EBR 617-B

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. [. . . ] Cooking zone automatically changes back to the highest heat setting. To touch deactivate, touch a heat setting . The power management divides the power between two cooking zones in a pair (see the illustration). The Power function increases the power to the maximum level for one cooking zone in the pair and decreases the power in the second cooking zone. The display for the reduced zone changes between two levels. Vate the timer but do not set the heat setting. Touch again and again until the indicator for the necessary cooking zone comes on. This function does not deactivate the timer function. The display shows the heat setting that you set before. When the Stop and Go function operates, you cannot change the heat settings. You must set the cooking zone before you activate the timer. A whistle sound: one or more cooking zones operate with high power levels and the cookware is made of different materials (Sandwich construction). Humming: one or more cooking zones operate with high power levels. The noises are normal and do not indicate a malfunction of the appliance. In induction cooking, a powerful electromagnetic field almost instantly generates heat inside the cookware. cookware material · Correct: cast iron, steel, enamelled steel, stainless steel, a multi-layer bottom (marked as correct by the manufacturer). Water boils very quickly on a zone set to the highest heat setting. You can attach a magnet to the bottom of the cookware. The bottom of the cookware must be as thick and flat as possible. Cookware dimensions: induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. But the magnetic part of the bottom of the cookware must have a minimum diameter of approximately 3/4 of the cooking zones. Put cookware on a cooking zone before you start it. [. . . ] Turn the lamp glass cover counterclockwise to remove it. The drawer underneath the oven can be removed for easier cleaning. When the oven is in use, heat can build up in the drawer. For this reason, do not keep flammable things in there such as e. [. . . ]