User manual AEG-ELECTROLUX EC1000L JS

[. . . ] The voltage for both the hotplates and the refrigerator is 230 - 240 V. ASSEMBLING First unpack the base unit and position in front of the place of installation and provide space around it for assembly. [. . . ] FINAL ASSEMBLY · Re-hang the doors and if needed, adjust the hinges. · Connect the plugs in the right wall sockets and test all functions. · Check that the safety micro switch cuts the circuit to the lighting and the hotplates but not to the refrigerator. · Connect water and run through to check seals are tight. SAFETY INSTRUCTIONS The compact kitchen is approved by SEMKO for connection according to the enclosed instructions. The hotplates effect 1000 W respectively 1200 W may not be increased by exchange. The top unit has a safety switch for the hotplates and light / socket assembly. The safety switch closes the circuit when the door is shut and may not be bypassed. 822 90 24-12 ELECTRICAL INSTRUCTIONS HIDEAWAY MINI-KITCHEN WITH HOTPLATES 1. 13 amp sockets are required for the base unit. 13 amp socket is required for the top unit. (An additional 13-amp socket may also be required for a microwave housed within the top unit). The 2 wires located at the back of the top cupboard unit must be connected to the control box located under the sink (behind the controls for the hotplates). [. . . ] Do not use 2/3 way connectors or gang sockets. The top unit should not be connected to the same phase as the base unit. Wiring diagram for connecting the top cupboard to a base unit fitted with hotplates. TOP DIAGRAM A Showing existing connections to be found in the control box situated behind the hotplate knobs on the base unit. BOTTOM DIAGRAM B Showing the spiral hose with 2 wires located at the rear of the top cupboard. [. . . ]