User manual AEG-ELECTROLUX ECD22

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. electrolux. com Register your product for better service: www. electrolux. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. electrolux. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. [. . . ] To drain the water refer to ‘At the end of the programme’. 7. 2 Spin With this option you can change the default spin speed. The indicator of the set speed comes on. Additional spin options: No Spin • Set this option to deactivate all spin phases. • Set this option for very delicate fabrics. • The rinses phase uses more water for some washing programmes. 7. 3 Prewash With this option you can add a prewash phase to a washing programme. When you set this option the programme duration increases. The related indicator comes on. 10 www. electrolux. com 7. 4 Delay Start With this option you can delay the start of a programme by 9, 6 or 3 hours. The indicator of the option and the indicator of the set value are on. 7. 5 Extra Rinse With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on. comes on/goes until the indicator off. You can activate this option: , the options and • After you press the programme knob are locked. : the appliance • Before you press cannot start. 7. 8 Permanent extra rinse With this option you can permanently have an extra rinse when you set a new programme. 4. 9. 8 Opening the door While a programme or the delay start operates, the appliance door is locked and is on. If the temperature and level of the water in the drum are too high, you cannot open the door. Open the appliance door when the delay start operates: 1. 4. Wait until the door lock indicator goes off. The delay start continues to operate. Turn the programme knob to deactivate the appliance. to Open the appliance door when the programme operates: 1. 4. Turn the programme knob to to deactivate the appliance. Wait for some minutes and then open the appliance door. Set the programme again. The appliance drains and spins automatically after approximately 18 hours (except for Wool programme). 9. 10 Stand-by Some minutes after the end of the washing programme, if you do not deactivate the appliance, the energy saving status activates. The energy saving status decreases the energy consumption when the appliance is on the stand by. • The indicator of the flashes slowly • Press one of the options to deactivate the energy saving status. 9. 9 At the end of the programme • The appliance stops automatically. • The acoustic signal operates (if it is activated). [. . . ] Make sure that the connection of the drain hose is correct. Set the drain programme if you set a programme without drain phase. Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usually. Set the spin programme. Make sure that the drain filter is not clogged. Adjust manually the items in the tub and start the spin phase again. [. . . ]