User manual AEG-ELECTROLUX ECLIPSE 15

[. . . ] USER GUIDE UK DECT PHONE ECLIPSE 10/15 V1 P1 P3 P4 15 16 13 1 2 3 7 8 9 12 14 4 5 6 10 11 P5 P2 1. BECAUSE WE CARE UK Thank you for purchasing this product. This product has been designed and assembled with utmost care for you and the environment. This is why we supply this product with a quick installation guide to reduce the number of paper (pages) and therefor save trees to be cut for making this paper. A full and detailed user guide with all the features descripted can be found on our website www. aegtelephones. eu. [. . . ] (To change time format, see Change the Date Format on page 51. ) >For 24-hour format, enter 1:30pm as [1], [3], [3], [0]. >For 12-hour format, enter the time and then press + to select am , or press- to select pm. >If you make a mistake, press to delete the last digit entered. Press to return to standby mode. UK 12. 1. 1 Change the Time Format The time can be displayed either as 12-hour or 24-hour. Press to “CLOCK&ALARM“ and then press to select. Press to “SET FORMAT” and then press to select. Press to select 12 HOURS or 24 HOURS and then press to confirm. 12. 1. 2 Change the Date Format The date can be displayed either as Month/Day or Day/Month. From the home screen, press Press to “CLOCK&ALARM“ and then press to select. Press to “SET FORMAT” and then press to select. Press to “DATE FORMAT” and then press to select. Press to select “DD/MM” or “MM/DD” and then press >A confirmation tone is played. 12. 2 Alarm Settings to confirm. An alarm can be set on a handset, to sound at a set time only once or repeated each day. When an alarm is set, the alarm icon is shown on the handset display. When the alarm time is reached, the handset will flash ”-ALARM-” on the display and sound an alarm for 1 minute, at the same volume setting as the handset ringer. If the ringer is off, it will ring at volume setting 1. When the alarm rings, you can press any key on the handset to stop the ringing, even if the keylock is activated. From the home screen, press Press to “CLOCK&ALARM“ and then press to select. Press to “ALARM” and then press to select. >OFF: Turn alarm off >ONCE: The alarm sounds once at the set time. >DAILY: The alarm sounds daily at the set time. If “ONCE” or “DAILY” is selected, enter the desired hour and minute. [. . . ] Disconnect the base unit from the telephone line and plug a different phone. If the call does not work and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty. If you cannot make a call, the fault may be on the exchange line. [. . . ]