User manual AEG-ELECTROLUX EDC5470

[. . . ] C o n d e n s a t i o n d r y e r User Information EDC 5470 125984580-01-080306-01 g Dear customer, Please read this user information carefully. In particular, pay attention to the section "Safety" on the first pages. Keep this user information in a safe place for later reference. Pass it on to any subsequent owners of the unit. [. . . ] Programme memory position MEMORY 1 is offered first. EXTRA DRY Cycle end at dýaýa Tür Porte U/Min T/Min. Option Options Ok Ok 12. 45 15. 16 Zeit Temps aýaýaýSýaýaýaýaýa Memory 1 Store program? aýaýa Tür Porte U/Min T/Min. Option Options Ok Ok 12. 45 3 To change to another memory position, press aýaýaýaýBýaýaýaýa Zeit Temps 3 The Memory can be overwritten at any time with a new programme combination (see Changing the Memory the OPTION button. The programme combination is now stored to programme knob position MEMORY 1 and in the future can be selected directly using the programme knob. "Changing the Memory"), but cannot be deleted. 1. Put together the new programme combination as required (for an example, see "Setting the Memory", steps 1 and 2). Press the OPTION button repeatedly until the ú SETUP symbol flashes. Using the OPTION button select the memory position to be changed, e. Store the new programme combination using the OK button. 17 Sound The volume of the acoustic audible signal can be selected. Turn the programme knob to any programme and press the OPTION button repeatedly, until the ú SETUP symbol flashes. Press the OPTION button repeatedly, until SOUND is shown in the display. Press the OPTION button repeatedly until the desired volume (NORMAL, LOW, NO SOUND) is shown in the display. Press the OK button to confirm the setting. The icon changes to the next special function. Press the OPTION button repeatedly until the initial display is shown. Sound NORMAL aýaýa Tür Porte U/Min T/Min. Option Options Ok Ok 12. 45 aýaýaýaýBýaýaýaýa Zeit Temps Water hardness The dryer's degree of dryness detection can be set to the hardness of the washing water. Turn the programme knob to any programme and press the OPTION button repeatedly, until the ú SETUP symbol flashes. Press the OPTION button repeatedly, until WATER HARDNESS is shown in the display. Press the OPTION button repeatedly until the desired water hardness (NORMAL, SOFT, HARD) is shown in the display. Press the OK button to confirm the setting. The icon changes to the next special function. Press the OPTION button repeatedly until the exit icon is displayed. Water Hardness NORMAL aýaýa Tür Porte U/Min T/Min. Option Options Ok Ok 12. 45 aýaýaýaýBýaýaýaýa Zeit Temps Language 1. [. . . ] 14. Insert loading door and hinges into recesses on the front of the machine and screw down. 15. Once the door stop has been replaced, check the function of the DOOR (TÜR) button. Note regarding contact protection: The machine is only secure for operations again once all plastic parts have been inserted. Special accessories The following special accessories are available from your Service Force Centre or your specialist dealer: Intermediate installation kits for stacked washer and dryer These intermediate installation kits can be used to arrange the dryer and an AEG-Electrolux washing machine (60cm wide, front loading) as a space-saving washer/dryer stack. The automatic washing machine is at the bottom and the dryer is at the top. [. . . ]