User manual AEG-ELECTROLUX EDH3498RDL

[. . . ] We recommend that you keep this instruction booklet for future reference and pass it on to any new owners. After unpacking the condenser dryer please check it is not damaged. If in doubt, do not use the appliance but contact your local Electrolux Service Centre. Contents Important safety information. . . . . . . . . . . . . . . . . . . . . . 3 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] These fabrics will then dry better. Do not place in the appliance any wet laundry which is not specified on the care label as being suitable for tumble-drying. This appliance can be used for all wet laundry items which are labelled as suitable for tumbledrying. Do not overload the appliance. loading volume of 7kg. EMAN_Energy Star_0409. indd 11 12/5/09 11:46:28 AM 12 daily use electrolux Average laundry weights bathrobe quilt cover man's work shirt man's pyjamas sheet tablecloth man's shirt night dress pillow case towelling towel blouse ladies' briefs men's underpants napkin tea cloth 1200g 700g 600g 500g 500g 250g 200g 200g 200g 200g 100g 100g 100g 100g 100g Selecting the program Switching machine on Turn the program selector to any program. The machine switches on. When the loading door is open, the internal lamp illuminates the drum. Open loading door: Push against the loading door (push point) 2. Load your laundry (do not force it in). Use the program selector to set the program you require. The estimated time to end of the program appears in the LCD in h:min format (hours:minutes). During the cycle time elapses by steps of one minute; less than 1 hour the leading zero is not shown (e. g. "59", "5", "0"). Wool/Silk To chose Wool or Silk while program selector is set to Wool/Silk program. To activate Wool program performance: 1. Delay With the Delay button, you can delay the start of a program by between 30 minutes and a maximum of 20 hours. Select the program and additional functions. Press the Delay button as many times as necessary until the required time of the delay appears on the display, e. g. if the program is to be started in 12 hours. If the display is showing and you press the button again, the time delay will be cancelled. The display will show and then the duration of the selected program. To activate the delay timer, press the Start/Pause button. The amount of time remaining until the program is set to start is continuously displayed (e. g. 30' etc). To permanently activate or deactivate buzzer see the chapter Machine settings. EMAN_Energy Star_0409. indd 13 12/5/09 11:46:29 AM 14 daily use electrolux Child lock The child lock can be set to prevent a program being accidentally started or a program in operation being accidentally changed. The child lock function locks all buttons and the program selector. The child lock can be activated or deactivated by holding down the Buzzer and Time buttons simultaneously for 5 seconds. Changing program To change a program which has been selected by mistake once the program has started, first turn the program selector to off and then reset the program. If the child lock is set: ­ before program is started, the appliance cannot be used ­ after program is started, program in operation cannot be changed The icon appears in the display to indicate that the child safety device is activated. The child safety device is not deactivated once the program comes to an end. [. . . ] Where you are within an Electrolux service area, this warranty covers the cost of transport of the Appliance to and from Authorised Service Centres of Electrolux and travelling costs for representatives of the Authorised Service Centre to and from your home or business. If you are outside an Electrolux service area, you will bear these costs. For information about whether you are within an Electrolux service area, please phone 13 13 49 in Australia, or 0800 10 66 10 in New Zealand. Proof of purchase is required before you can make a claim under this warranty. [. . . ]