User manual AEG-ELECTROLUX EE7004011M

[. . . ] EE7004011 EN OVEN USER MANUAL 2 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. . . Visit the webshop at: www. aeg-electrolux. com/shop Contents 3 CONTENTS 4 7 9 9 12 14 16 18 20 22 26 27 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if. . . [. . . ] When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. Touch any sensor field or open the oven door to stop an acoustic signal. Deactivate the appliance. to Setting the SET+GO To start of the appliance with necessary settings with only one touch of the sensor field, any time later. Set an oven function (or programme) and temperature (refer to "Setting the oven function" and "Changing the oven temperature"). Set DURATION (refer to "Setting the DURATION"). Touch again and again until will flash in the display. This dot shows which clock function is activated. Touch any sensor field (apart from ON/OFF) to start the SET+GO function. 16 Automatic programmes You can use SET+GO function only if DURATION is set. Check result (selected models only) If you set END or DURATION function, 2 minutes before end of cooking an acoustic signal sounds and lamp activates. The appliance goes to the setting of the END or DURATION function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END "). When the Time delay function is activated the display shows static symbol of the oven function, with a dot and . The dot shows which clock function is on in the Clock/ Residual heat display. Setting the MINUTE MINDER Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the appliance is off. and "00" flash in the display. Use First you set seconds and then minutes and hours. When set time ends, an acoustic signal operates for two minutes and "00:00" and flash in the display. Touch any sensor field or open the oven door to stop an acoustic signal. AUTOMATIC PROGRAMMES WARNING!Refer to "Safety information" chapter. There are 20 automatic programmes and recipes. [. . . ] Hold of the oven door with one hand on each side and pull it away from the oven at an up angle. To install the door follow the procedure in reverse. The number of glass panels if different for the different models. Put the oven door with the outer side down on a soft and level surface to prevent scratches. [. . . ]