User manual AEG-ELECTROLUX EED14600X

[. . . ] € The mains cable must not come into contact with any hot parts of the appliance. € Do not remove the filter holder during the brewing process as the appliance is pressurised. € When the steam function is used there can be some hot water dripping from the brewing head. The water is hot, there is a risk for scalding. [. . . ] Use the tamper to press ground coffee lightly. Insert the filter holder into position as shown. Turn the handle counterclockwise to tighten its position, see image. Please note that too much force will shorten the components lifespan. When the heating is finished, place one or two cups on the drip grid and push the one cup or two cup button. After brewing, remove the filter holder. Twist it to the left and take it out of the retainer. Fold finger protector forwards and remove used coffee grounds from the filter. Then take it out of the holder and clean it with water. Dry with a cloth before putting it back into the filter box. Press and hold the one or two cup button. Switch the machine on and let it heat up. Place the filter holder in position, without any filter. Push the two cup button a few times and let 1/4 of the water pass through. Turn the machine off and wait for 10 minutes. Repeat this procedure with another 1/4 of decalcifying solution. Push the hot water button and let the remaining solution flow through the steam nozzle. Fill the water tank with fresh water and run the machine until the tank is empty. 11 Troubleshooting / Fehlersuche GB A) Both indicator lights for 1 and 2 cups are flashing: • The water tank is empty. B) All indicator lights are flashing: • If steam/hot water has been used for too long, make a pause for 30 seconds. € Switch the machine off for 5 minutes and restart it. If the lights are still flashing, contact customer support. [. . . ] Old appliance on the product or on The symbol its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. [. . . ]