User manual AEG-ELECTROLUX EED29600X

[. . . ] € The mains cable must not come into contact with any hot parts of the appliance. € Do not remove the filter holder during the brewing process as the appliance is pressurised. € When the steam function is used there can be some hot water dripping from the brewing head. The water is hot, there is a risk for scalding. [. . . ] Choose filter for one or two cups, fold back the finger protector and put the filter in the filter holder. Fill the filter with ground coffee (one scoop for single espresso, two scoops for double). Use the tamper on the other side of the spoon to press ground coffee lightly. Insert the filter holder into position as shown. Turn the handle counterclockwise to tighten its position, see image. Please note that too much force will shorten the components lifespan. When the heating is finished turn the selector dial to . Espresso begins to flow through the coffee outlet – turn the selector dial to when you have reached a desired amount. After brewing, remove the filter holder. Twist it to the left and take it out of the retainer. Fold finger protector forwards and remove used coffee grounds from the filter. Remove the brewing head (keep components together) with a coin before filling the tank with water and decalcifyer according to product instructions. Switch the machine on and let it heat up. Place the filter holder in position, without any filter. Turn the selector dial to and let 1/4 of the solution pass through. Turn the machine off and wait for 10 minutes. Push the hot water button and let the remaining solution flow through the steam nozzle. Fill the water tank with fresh water and run the machine until the tank is empty. 11 Troubleshooting / Fehlersuche GB A) Both power and steam indicator lights are flashing: • Check that the selector dial is turned to . € If steam/hot water has been used for too long, make a pause for 30 seconds. € Switch the machine off for 5 minutes and restart it. If the lights are still flashing, contact customer support. [. . . ] Pl h hr sr ro bg sl eS lv lt 13 Disposal / Entsorgung Mise au rebut / Verwijdering GB Disposal Packaging materials The packaging materials are environ­ mentally friendly and can be recycled. The plastic components are identified by markings, e. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance on the product or on The symbol its packaging indicates that this product may not be treated as household waste. [. . . ]