User manual AEG-ELECTROLUX EEWA4040

[. . . ] The appliance may only be connected to a power supply with the same voltage as that specified on the rating plate (K)! Never use the flex to pull the plug out of the socket but pull the actual plug. If the mains cord of this appliance is damaged, it has to be replaced by the manufacturer or its customer service or a trained electrician to avoid risks. [. . . ] If the appliance is used for any other purpose or is incorrectly used, the manufacturer adopts no liability for any damages which may result. Do not switch on the appliance without water. Packaging material The packaging materials are environmentally friendly and can be recycled. Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Before using your new kettle you should wipe it inside and outside with a damp cloth due to hygienic reasons. This appliance is equipped with a boildry safety cut-out. This feature protects the appliance from overheating when started without water or from boiling until it is empty if used with the lid open. If the appliance is accidently switched on without water, it is automatically protected against overheating. the heating process is automatically interrupted. Before using the kettle again let it cool down for 510 minutes. 0 Plug the mains plug into a wall socket. If the mains cord is longer than necessary it can be wound up at the bottom of the base unit (J). Press release button for lid (E) towards the handle (F) and open the lid (B). Fill with at least sufficient water to make it visible on the water level indicator (G), but not higher than the MAX. The automatic switch off can only function reliably if this is done. [. . . ] Use a standard descaler following the directions; preferably choose an environmentally friendly, descaling agent suitable for stainless steel according to the instructions from the manufacturer. 0 First fill in water, then a standard descaling preparation which is not too strong. This appliance conforms with the following EC Directives: · Do not boil the solution as it could foam over. [. . . ]