User manual AEG-ELECTROLUX EFC1416X/S

[. . . ] Note that the safety devices alone are not capable of eliminating all accident risks. It is therefore very important to carefully read all the operating instructions, recommendations and warnings prior to installation and use of the appliance. Note in particular the text paragraphs with the danger triangle design, to avoid damages to persons or objects. Keep this instruction booklet in a safe place: this booklet should always accompany the appliance at such time as it is sold or given to other persons for use. Installation and service Any electrical installation of the cooker hood must be carried out by a qualified electrician and the hood itself must be installed by someone with experience. [. . . ] The carbon filter is to be used when the hood is connected to the recirculation mode. A Extraction mode In this mode fumes are extracted to the outside via a hose connected to the coupling ring A. In order to obtain the best performance the hose should have a diameter equal to the outlet hole. Fig. 1 Recirculation mode The air is filtered through a charcoal filter and returned to the kitchen. You will need an original ELECTROLUX Type 29 charcoal filter for the recirculation mode. Fix the deflector using 4 screw Ø 2, 9x13 mm. 2 35 Using the cooker hood Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking. The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared. The control switches are located on the hoods front panel: OFF Motor button Speed 2 button Correct ventilation If the cooker hood is to work correctly there must be an under pressure in the kitchen. It is important to keep the kitchen windows closed and have a window in an adjacent room open. ON/OFF Light button Important This is not applicable for recirculation. Great care Speed 3 button must be taken if the hood is used at the same time as a burner or fireplace (e. g. If the light does not come on, make sure the bulb has been inserted in correctly before contacting the technical assistance service. 37 Guarantee Conditions Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been used for normal domestic purposes only, and in accordance with the manufacturers instructions. The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. All service work under this guarantee must be undertaken by an Electrolux Service Force Centre. Any appliance or defective part replaced shall become the Companys property. This guarantee is in addition to your statutory and other legal rights. Home visits are made between 8. 30am and 5. 30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged. Exclusions This guarantee does not cover: Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the European Community (EC) or European Free Trade Area. Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. Products of Electrolux manufacture which are not marketed by Electrolux. European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: The guarantee starts from the date you first purchased your product. [. . . ] Hang the hood on the hooks and level it with the adjustment screws. Remove the grease filters and mark for the 4 screws (T-R). ! Y Y T Y R Rawl plugs+hooks Template Adjustment screws T Y Fig. 7 Remove the hood and drill the holes (4 x Ø 8 mm). Insert the rawl plugs and fit two screws on upper holes, do not tighten completely, they will serve as additional hanging points. R Fig. [. . . ]