User manual AEG-ELECTROLUX EFC9660X

[. . . ] User manual Manual de instrucciones Manual de instruções EFC 9660-9661 electrolux safety warnings 3 Electrolux Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. [. . . ] · Push-button 1 (ON/OFF): used to set the fan to speed 1. · Push-button 2 (ON/OFF): used to set the fan to speed 2. · Push-button 3 (ON/OFF): used to set the fan to speed 3. electrolux control panel 9 Model EFC 9660 GB 1 2 3 ab 4 5 6 · The hood can also be commanded from the control panel or the remote control. (the remote control is a special accessory and is ordered separately). 1. Mains switch, ON/OFF Press for less than 1 1/2 seconds and the cooker hood goes into the "stand by stand by" position (point "b" is illuminated). Press for more than 1 1/2 seconds and the cooker hood turns OFF, ALL the controls (except the light push button) are disabled (the display is off). Press again for more than 1 1/2 seconds to reset the cooker hood to "stand by". 2. Light switch, ON/OFF 3. Display 4. Start and choice of motor speed 1-2-3-1-2. . . . . . . . . The Intensive speed runs for 5 minutes: If the hood is on when the Intensive speed is activated, the hood will revert to previous speed after 5 minutes. If the hood is off when the Intensive speed is activated, the hood will automatically turn off after 5 minutes. To interrupt the Intensive speed, press button 1 or 4. The letter P appears on the display and the remaining time (the point "a" is a flashing), if interrupted an acoustic signal is heard. 6. Self-Timer: times all the speed levels (the point "b" is flashing), and then the b cooker hood switches off: The self-timer is set as follows: 1st speed level 20 minutes 2nd speed level 15 minutes 3rd speed level 10 minutes The display shows the remaining operation time, at the end of the time an acoustic signal is heard. Depressing the push-button again exits the function. Should the hood or the controls fail to operate: disconnect the power supply for at least 5 seconds. After reconnecting the power supply wait 15 seconds and then check that the cooker hood is now operating correctly. 10 electrolux electrolux control panel GB Grease charcoal Grease and charcoal filter maintenance indicator This hood is fitted with a device that indicates when it is necessary to clean the grease filter or the charcoal filter (if the hood is used in the recirculation version with a charcoal filter). On delivery, the hood is not supplied with a charcoal filter, so the saturation indicator will be disabled. If the hood is to be used with a charcoal filter, the saturation indicator light must be enabled as follows: Set in "Stand by the hood. Stand by" Press buttons 4 and 5 simultaneously and hold them for 3 seconds. At first only the grease filter LED F will light up, but when the charcoal filter LED C lights up the saturation indicator will be enabled. To disable it: Press buttons 4 and 5 again simultaneously and hold them for 3 seconds, until the charcoal filter LED goes out. Grease filter LED (F) LED F will start to flash when it is time to clean the grease filter. Cleaning will be necessary after 40 working hours. [. . . ] Appliances fitted with a plug can be connected to any standard power socket within easy access. Should it be necessary to provide a fixed connection, the hood must only be installed by an electrician authorised by the local electricity board. When installing, an omnipolar disconnector with a distance of at least 3 mm between contacts must be provided. Fixed connection of the appliance must only be carried out by an authorised electrician. GREEN & YELLOW 5AT warnings Safety warnings for the electrician Connect the hood to the mains supply via a double pole switch which has 3 mm minimum separation between the contacts. [. . . ]