User manual AEG-ELECTROLUX EFCR90441U

[. . . ] 32 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Inhalt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Contents Information about safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Description of the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Older children must be supervised if using the appliance. Young children should be supervised to ensure that they do not play with the appliance. WARNING - Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. 43 Description of the aspiration hood Functions Two systems are possible: Aspiration of the air outside with a flue assembly (optional) and a waste disposal tube. Recirculation of the air using an active carbon filter (optional). The EFCR 143 model has been designed exclusively in the aspiration mode and must be connected to an external aspiration system. The EFCR 942 model has been designed exclusively in the aspiration mode and must be connected to an external aspiration system. The aspiration hood cannot be connected to the fume tubes of other apparatuses functioning with sources of power other than electricity, e. g. a boiler or a fireplace. Aspiration version The air is evacuated by a tube that must be connected to connection flange A. 1 The hole must have the same diameter as the waste disposal tube in order to obtain an optimal result. Air recirculating version (filtering) D Attention!The EFCR 942 model has been designed exclusively in the aspiration mode and must be connected to an external aspiration system. The air is filtered through the active carbon filter and brought back into the kitchen through the upper grill of the evacuation tube. The filtering version requires an original Type 160 Electrolux filter. Accessories The following accessories are supplied together with the hood: 1 cover complete with commands, illumination and ventilator motor (the EFCR 942 model is without a motor and must be connected to an external system of aspiration); A telescopic flue that includes an upper and a lower U section; 1 montage template; 1 support for the flue complete with ventilation system; 1 deflector (concerns only the EFC 94266426 model); 1 plastic envelope containing the montage and documentation material. Deposits of fat on the filter and the sides of the evacuation conduit are a fire danger if, for example, a ring has been forgotten and inadvertently left on (or in the case of other kinds of overheating). Cleaning the hood Clean the exterior of the hood with a damp cloth and a neutral detergent. Never use cleaning products containing corrosive and abrasive, agents or inflammable substances. Cleaning the grease filter Clean the grease filter every month or every two months, according to how long the hood is used. The more often the filter is cleaned, the more often will it be able to retain the fats. To remove the filters Fig. 4: · Press the clip on the metal anti-fat filter backwards and remove the filter downwards. The filter consists of aluminium reticules upon which the fat is collected. Clean the filter by immersing it in hot water or putting it into the dishwasher. Wait until the filter is dry before remounting it. Putting the filter into the dishwasher may fade the filter. · Montage- Fig. Remove the carbon filter by unscrewing the two screws that fix it and pulling downwards. Do not for get to clean the filter periodically. · Follow the instruction in reverse to disassemble the filter. [. . . ] Concerns only the EFCR 942 model: Connect the waste disposal tube to one external aspiration unit (see following paragraph Connection to an external motor). Only for the EFCR 942 model: It is also necessary to carry out the electrical connection to an external aspiration unit (see following paragraph Connection to an external motor). Check, in the case of a non-return valve being used, that it is functioning correctly and is not blocked by the tube. Fix the upper part of the hood to its support with two screws (Fig. [. . . ]